Get the latest news about SolarWinds Kiwi CatTools
Are you looking for the best Variable frequency drives? We have variable frequency drives for single phase, three phase, different horse power, etc. for every type of your requirements. Buy VFDs at the best rates now. Variable Frequency Drive
Good Day, We have Kiwi CatTools v3.11.3 installed on a Windows server. We have successfully setup a daily TFTP backup of our Cisco ASA FWs with multiple contexts. This was accomplished by setting the following commands in the TFTP job. Changeto context fw_inside write net 172.254.1.2:fw_inside_backup Changeto context…
Is there anyone who can help me out and guide me about what are the differences between risk assessment and environmental impact assessment?
Hi all, Is cattools 3.11.5 running on windows 2019 a supported combination?
Hi All I get a weird output error when I perform a config backup using the embedded scripts. This only happens with my 3702 APs that are configured as WGBs for some reason ever 23 lines has an " -- " added to it. See below for one example. Not sure why it happens. Any ideas? interface Dot11Radio0 no ip address ! encryption…
I am trying to import a number of devices with new passwords into the DB on 3.9.1? Every time I try and import, whether with a few entries or many, I receive the following error - Has anyone run across this or have a solution? I ran across an similar error on the Japanese version which had to do with the Language settings…
Failed to connect to 10.10.4.52.Reason:Please set your login for selected protocol..Giving up after 3 connection attempts. Login to the backup configuration using SSH shows the reasons for the failure above, but the configuration can be successfully backed up using Telnet,Could you please help me to find out the…
We are moving to a new version of ArubaOS (from version 6 to 8). Our current environment is getting backed up via Cattools and works just fine. When we try to accomplish same backups on ArubaOS 8, it does not work. (We are running the latest version of Cattools - 3.11.5) In the 6.X Aruba environment we use device.send…
we have been using Cattools since it was released by KiwiSoft years ago. we just changed the user password that has been used in all our device/scripts over the weekend, and i am having some difficulty updating my devices. Since I have over 400 devices in various groups on the system, i would filter by group, highlight all…
What is the function that Cattools uses to perform a "Connect Via" backup? I have a Fortigate which uses VDOMs (Virtual firewalls) and which I would like to use it as a jumpbox to back up other devices After logging onto the device, additional commands need to be executed to enter the correct virtual instance: config vdom…
Failed to execute HTTP request -->System.Net.HttpRequestExeption: An error occurred while sending the request. ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.AuthenticationException: The remote certificate is…
Good Afternoon, We have a task with 9 elements. We would like to cc someone other than the tech when task 7 is run. So the tech receives a ticket but a client will also receive a copy of that particular ticket/task. Is that possible? Thanks in advance for the feedback.
We would like to be able to export this information to review and update as needed.
Hello everyone, One of my NOC personnel had a great idea to add a link that will take you to the intelligent maps for topology segments we have created that's nested in device profile. We thought that maybe it would help less experienced folks be able to get to information more quickly. We figured we might just be able to…
Hi SolarWinds team, We would like SRM to provide a clear and reliable onboarding path for HPE XP8 Gen2. Unlike HPE 3PAR (where SRM onboarding is straightforward with credential + endpoint), XP8 Gen2 does not have an obvious/validated flow in SRM and discovery/collection is unclear or inconsistent. Feature Request: Add an…
Is there data collected by NTA as to how much of the actual NetFlow protocol it is receiving and from where? I'm trying to determine capacity needed for the interfaces sending the Netflow from a new network device.
Please give us the ability to make Application Connections Widget Conditional on the node being polled by an agent.
Today, devices discovered as network devices are categorized under a general Network Device type. While this works for generic infrastructure, it does not distinguish firewalls from other network devices such as routers, switches, or wireless controllers.
When I utilize custom field, forms and Dynamic form rules to add a custom field into an incident, it goes to the bottom of the incident form below Sites and Department. If my field contained additional descriptions that would be like a third sub-category, I would have liked to move it upwards below the category and…
As we ignite the engines for a new year of exploration, we’re taking a strategic pause to ensure our trajectory is perfect. While our standard mission modules are being recalibrated for the next stage of our journey, we’re handing the controls over to you. Before we launch our full 2026 mission schedule, we need a Status…
Can we use the NCM Approval function to require a Network Sonar Discovery to be approved before it runs? I don't believe so, but want to ask.
We have an ESM setup where IT and a non-IT dept will be using the the SWSD platform for managing separate tickets. As IT we'll have some but not all IP based assets, but the non-IT group will need to manage a lot of non-IP units. What we need to figure out, is how to either create a custom form that can be used for asset…
Hi Community, My Kiwi NG 1.4 receives all snmp v3 from my equipements (fw, storage, ESX, …) traps but no syslog traps. I have to use Secure TCP with TLS 1.3 only. Logs show "The server mode SSL must use a certificate with the associated private key". I suppose I have to export Kiwi NG as pfx…or am I totally wrong ? Does…
Hello, we are using the Event Log forwarder to forward the Windows Event logs. It is working but after some hour they disappear from the Kiwi Dashboard rsp. Events with Filter to the related Server. In the Logfiles the entries are present but not in the DIsplay anymore Looks like the Display will be cleaned up. Is there a…
I want to set up the SD portal so the widget buttons I've created don't always open a brand new browser tab. How can I do this?
Does anyone has a template for SQL Sentry to monitor the database state i.e Off-Line, recovery, anything status <> 0 ? Thanks in advance.
I know, I know, it is coming, but when? Ideally I would like to make a custom field we call "asset number" and chack that against the Asset ID entry in Active Computers within Assets so that our end users stop just typing PC or Computer in that field. Being able to match the number they put in with a known asset would give…
I am wondering if anyone has any issues with CI's being attached to incidents when they are created? I have my orion connection setup but i'm seeing online that the instructions to automatically map thru the self hosted integration is a bit different. My orion connectors are located under Discovery and assets, not in the…
I need help to export all dependencies with child and parent groups as as report
We use the DNS Analyzer extensively to trouble shoot issues on the network. Since the last two versions of Toolset the software has been decommissioned and on the latest version of Toolset it is gone completely. Can the application be restored completely to Toolset.
Originally posted almost 9 years ago (in 2017), it did get quite a few thumbs up. Solarwinds and CyberArk Integration - THWACK 1. CyberArk works as a password vault and hence it can securely store the credentials used by Solarwinds (user name + password) 2. CyberArk comes with certain level of automation as well which can…
There is currently an option within each instance that "Subcategory is a mandatory field", which requires a subcategory when creating a new ticket. (Service Desk → Categories) This is very limiting, as not all of our categories even HAVE subcategories. If we enable this, you can't submit a ticket within a category which…
This is @tphelps01 idea not mine, just posting it as it's a good one FEATURE REQUEST - Add SAML authentication for SWQL Studio - THWACK SWQL Studio does not allow for SAML authentication to connect to the Orion Server. Please add SAML authentication to SWQL Studio
Probably I had posted this feature request few years ago, isn't it possible to release a feature which would automatically pick least used poller (based on the weight of the poller) when you add a device to SolarWinds? It doesnt mean that you need to remove an option to manually select the poller, its just that when…
It looks like you're new here. Sign in or register to get started.