The most recent content from our members.
Hello Thwack community, when I try to run a firmware upgrade to a certain node, I am having the following issue by copying from polling engine tftp server the image and uploading it into the flash of my cisco switch 9300. copy tftp://[IP ADDRESS]/SUB-FOLDER/cat9k_iosxe.17.09.04a.SPA.bin flash: Destination filename…
Hello, Has anyone successfully backed up a Cisco Aironet 1830 WLC? If so, could you export it directly? I'm encountering an issue where the prompt gets stuck at (Cisco Controller) > instead of the expected Please use command: config snmp v3user create <username>. On the 1850 model, it's possible to trigger the "Press Enter…
Hey all, I have been pushing scripts to switches in the network and on a handful I get "Connection Refused by X.X.X.X" Connection has been tested with SNMP, which works, SSH and CLI test also works. The switch has taken the correct configuration from Solarwinds as well. Switch does not prompt any logging issue or a denied…
Dear, I'm experiencing an error where my APE doesn't want to download configs in NCM. I also can't manage my nodes anymore that are connected to this polling engine. What could be the problem here? All necessary ports are open and it still doesn't want to make a connection. PS: when I look at the config settings I see grey…
Hello there my estate is starting to use Aruba CX 6200 and 6300 switches and we can add them in NCM fine and also SNMP but I have found that I cannot get the SSH profile to download the config. I get the Connectivity issues discarding config (or config is too short) error message. I have confirmed that SW can SSH into the…
We just upgraded our environment to 2024.2.1 to address some issue and have found since the upgrade, 2 of our 60+ devices have stopped successfully running inventory on the nightly inventory job. Instead in the logs I get "ERROR Start job timeout" and nothing further. Is there a way to enable more logging to find the…
I tried backing up APIC running configuration using SolarWinds NCM with the custom device template I found here. However, I noticed that the configuration file was incomplete and seems NCM stopped downloading the configuration when it detected # " on the config line. Has anyone resolved this issue or had a workaround? Many…
Is it possible for nodes that report to a remote collector to use NCM? Or does all NCM go to the main engine?
For some reason, when I click on the "Execute Remediation Script on this note" from reports, the script does not run. I am in CLI mode and "execute Script in config mode" is checked. IF I also check "automatically execute script when violation is found" the script runs fine and the change is pushed out. I like to manually…
Hi All, I have a situation where Cisco switches are reporting high CPU utilization, as per cisco TAC it is due to NCM SSH conversation which connect to the device to run commands to display configuration and can perform other jobs. For testing we disabled NCM polling on the switch for some time and it decreased CPU…
It looks like you're new here. Sign in or register to get started.