Hello there my estate is starting to use Aruba CX 6200 and 6300 switches and we can add them in NCM fine and also SNMP but I have found that I cannot get the SSH profile to download the config.
I get the Connectivity issues discarding config (or config is too short) error message.
I have confirmed that SW can SSH into the switch using the connection profile creds and it can when I do the SSH test this is what comes out.
Last login: 2024-10-09 01:12:47 from 10.0.144.86
User ""redacted"" has logged in 79 times in the past 30 days
WAT-0006p-SW01#
WAT-0006p-SW01#
WAT-0006p-SW01#
WAT-0006p-SW01#
page 100
page 100
Cannot execute command. Command not allowed.
WAT-0006p-SW01#
show version
show version
Cannot execute command. Command not allowed.
WAT-0006p-SW01#
The xml output for the device template is as follows
<Configuration-Management Device="Aruba CX Switch" SystemOID="1.3.6.1.4.1.47196.4.1.1.1.325">
<Commands>
<Command Name="RESET" Value="page 100"/>
<Command Name="Reboot" Value="boot system primary${CRLF}y"/>
<Command Name="EnterConfigMode" Value="conf"/>
<Command Name="ExitConfigMode" Value="end"/>
<Command Name="Startup" Value="show startup-config"/>
<Command Name="Running" Value="show running-config"/>
<Command Name="DownloadConfig" Value="show startup-config"/>
<Command Name="UploadConfig" Value="${EnterConfigMode}${CRLF}${ConfigText}${CRLF}${ExitConfigMode}"/>
<Command Name="DownloadConfigIndirect" Value="copy ${ConfigType} ${TransferProtocol}://${StorageAddress}/${StorageFilename} cli"/>
<Command Name="UploadConfigIndirect" Value="copy ${TransferProtocol}://${StorageAddress}/${StorageFilename} ${ConfigType}"/>
<Command Name="EraseConfig" Value="erase startup-config${CRLF}Yes"/>
<Command Name="SaveConfig" Value="write memory"/>
<Command Name="Version" Value="show version"/>
</Commands>
</Configuration-Management>
One of the switch firmware info is
Version : ML.10.11.1021
Build Date : 2023-05-11 20:44:16 UTC
Build ID : ArubaOS-CX:ML.10.11.1021:e521752f3358:202305112028
Build SHA : e521752f33588aa20e5a9a274a5b4bac0b39c501
Hot Patches :
Active Image : primary
Service OS Version : ML.01.12.0005
BIOS Version : ML.01.0001
I cannot see clearly what the issue is on the top of my head as Cisco and older Arubas like the 2930m have no issues
I'm running SW NCM: 2024.2.1
