The most recent content from our members.
I'm currently using 10.2 NPM and 3.8 NTA. Recently when I checked on one of my nodes (Cisco 3750x switch) I noticed the chart pulled up was a Min/Max/Average response time bar graph. Now we've having intermittent issues with network latency and I was wondering how NPM can help us isolate those high latency areas.…
Hi guys, Whenever listing resources on nodes with several hundred interfaces like core switches i get the following popup: Has anything changed in the way one interacts with Orion in IE? This error never came up before :| Regards, Deltona
All - We are looking at setting up some windows event log consolidation to comply with some cyber security requirements. I currently have just one box sending syslogs to the Orion Syslog with Authentication successes and failures which works well. It is also showing up within the webconsole. Is there a way to only present…
After upgrading from NPM 10.1.3 to 10.2 we began to see every 30 minutes a stream of error messages on our Solaris 10 host, repeating approximately 36 times: Nov 30 20:51:39 tlc-host /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost Nov 30 20:51:39 tlc-host…
Hello, I've seen that NPM is a 32 bit application. Then the effort to upgrade a 32 bit OS (Windows 2003 Ent Ed. -> Windows 2008 R2) with the intent to add more than 4 GB of RAM can be quite useless. Is my assumption right? Second question: If I install on the same server NPM + IPAM + IPSLA + NCM, can make sense upgrading…
Hi, I have an Orion NPM 10.2 Server and its DB on a separate server. On the Orion NPM I added the IP SLA module and everything works great. I installed the Orion NCM 6.1 on another server, with its database on the same DB server as NPM but on a different instance. The NCM install ran smoothly with no issues. The initial…
Upgraded to 10.2 today. Love the new look and polling performance but do have some issues. One is all my IOS Catalyst 6500 (some are VSS) report 0 memory utilization post upgrade. Did work before, but not now? Tried some rediscoveries, list resources, remove and add charts, nothing seems to work. All my other IOS devices…
I have just upgraded both the APM to 4.2 and NPM to version 10.2. The Configuration wizard failed on the APM Installation with the error Input String Not in Correct Format. Now when I go to the website, it doesn't load and I get the following Error: The Settings Property 'APM.ApmSummaryViewID' was not found. Rerunning the…
Hi guys, Just installed NPM 10.2 on a freshly installed server. New database too. After scanning a scope for nodes using both snmp, icmp and wmi i get 99 nodes found - OK! When i get to the Interface Types to Import page, I get nothing in the the list. It is completely empty. Is this normal? Regards
It looks like you're new here. Sign in or register to get started.