The most recent content from our members.
Greetings All, A newbie to Solarwinds alerts and thus here for help please. Looking to alert on interfaces going down, and for 1 set of switches am looking to alert on all interfaces, whereas for a 2nd set of switches, am looking to alert only for 2 specific interfaces. We have both sets of switches differentiated with…
I have a critical interface, which is administratively up, and operationally down (normal state for span port monitoring). I need to create an alert to trap if the output rate (bits/sec) drops below a certain threshold. Here is sample of the interface to demonstrate that despite line protocol (operationally) down -…
We are previous users of Intermapper. They had one real nice feature that you set a maximum number of time you would be alerted for a problem. As an example we would use send an alert every hour for a max of 3 times. Then the alert would still be there but you would not get emails every hour after that point. This is…
We are trying to do a simple logic with SNMP traps / syslog alerting: * If the same (bad fan) message is repeated from the same (Host A) host, then suppress subsequent alerts from the same host for 6 hours. * If the same (bad fan) message is repeated from different (Host A and Host B) hosts, then trigger the alert but…
I'm setting up alerts in the advanced alert manager and would like to know the best way to get daily email alerts for active alerts. For instance, if there's an alert triggered for low disk space I want it to send the email every 24 hours so that the alert is not forgotten about. thank you.
I need help on configuring the alerts on when the values change below. I just cant seem to get it.MIBS are working correctly just cant get the alert part working correctly. These are the mibs I am using i just need to know when the values change and send me a alert. 1.3.6.1.4.1.9.5.1.3.1.1.10 1.3.6.1.4.1.9.5.1.3.1.1.12…
Hi, I am trying to set up advanced disk space alerts on my exchange boxes. I need to set up a when certain drives hit 35% and certain drives hit 40% and so on. So I am setting up different alerts for 35%, 40% etc and then I want to enter specific drives into these alert. When I am doing this and setting the alert as active…
I am using NPM 9.5 SP3 I have two alerts set up that are basically identical. One is Basic and the other is Advanced. They are set to trigger if the node name is 'whatever' and the CPU utilization is greater than 80% for 0 seconds. My statistics gathering interval is 1 minute for each alert. I run a CPU test program for 5…
Looking for best practice suggestions. I have been toiling with the format for trigger, reset, and suppress settings. Is it best to place node before condition? Proper Use of ANY and ALL especially in reset and suppress. Is this EVER going to be something added to the base product? Now with topology mapping enhancements…
Hi,I am having a question about the packet loss / percent loss alert in NPM.I want to create an alert that will be triggered when there is more than 40% loss and the alert reset must be when the packet loss is less than 80 %.The idea behind this is, we want to receive an alert a soon as the system is offline and we want to…
It looks like you're new here. Sign in or register to get started.