The most recent content from our members.
Provide data such as line code violations, path code violations, error seconds and the like. routerxyz#sh service-module Interface Serial0/0/0 Module type is T1/fractional Hardware revision is 1.2, Software revision is 20111206, Image checksum is 0x4347ED, Protocol revision is 0.1 Receiver has no alarms. Framing is ESF,…
Hello all First question on Thwack We just installed NPM, we have added most of our node, when I list resources on a device in the LAN it displays a list in a few seconds, when I try to list resources on a WAN (t1s) nothing happens,it would obviously take a longer time to populate the resources but we have been waiting for…
Historical view of things like Line Code Violations, Path Code Violations, etc.... T1 0/0/0 is up. Applique type is Channelized T1 Cablelength is long 0db No alarms detected. alarm-trigger is not set Soaking time: 3, Clearance time: 10 AIS State:Clear LOS State:Clear LOF State:Clear Version info FPGA Rev: 08121917, FPGA…
We have several routers deployed with a single T1 WAN connection. When monitoring these routers over NetFlow, I'm noticing that they will show far more data than supported over the link. Here is an example: http://grab.by/42H9 No idea what is causing this, anyone have any clue?
I've found a bit of an issue when using NPM and NetFlow Analyzer together. Keep in mind, I would like to monitor as few interfaces as possible to keep licensing down. First, I set up NPM. I have 50 routers, and I added ONLY their T1 interfaces. I did this instead of PPP interfaces so that I could also get things like error…
i want to create WAN link utilization alerts to send an 'email' on x% util for x minutes and another to send a 'page' for x% util for x hours. what do you think for a T1 circuit 'email' at 90% util for 45 min and a 'page' on 90% util for 3 hours. anything wrong with this? what would you suggest or what are you doing? how…
Hi All - I'd love to be able to collect statistics on line code and path violations on our point to point interfaces, but am having a hard time writing a custom poller. Basically, anything that's in dsx1AlmCnfGrpEntry ... currently, the readout on interface errors is pretty generic and doesn't help when I'm troubleshooting…
It looks like you're new here. Sign in or register to get started.