The most recent content from our members.
Hi, All: Does anyone help me the problem as below? Issue Description: A customer used the NPM 10.4 to monitor hillstone firewalls and Huawei switches, then he used "Universal Device Poller" to imported the OID and assigned them to these devices. After that, he could view the cpu value and chart in the "Node Details" page.…
I am trying desperately to configure an alert based upon the received value of a custom poller. My devices have two power supplies in them and I am polling the table: CISCO-ENVMON-MIB:ciscoEnvMonSupplyStatusTable OID: 1.3.6.1.4.1.9.9.13.1.5 Access: Not-Accessible Type: Sequence of SEQUENCE The table of power supply status…
Hi I made custom pooler for showing CDP neighbors for CISCO switches - MIB 1.3.6.1.4.1.9.9.23.1.2.1.1.6 It returns table like Status RowID p-kazakova-acc-sw05 10123.17 p-kazakova-tunrtr01 10124.4 p-kazakova-acc-sw01 10125.12 p-kazakova-acc-sw06 10126.14 p-kazakova-acc-sw04 10127.16 name - first column and port second…
I need help on configuring the alerts on when the values change below. I just cant seem to get it.MIBS are working correctly just cant get the alert part working correctly. These are the mibs I am using i just need to know when the values change and send me a alert. 1.3.6.1.4.1.9.5.1.3.1.1.10 1.3.6.1.4.1.9.5.1.3.1.1.12…
I'm trying to create an alert for a custom poller that generates when an APC battery status is other than Normal (value of 2). When I create the alert and test it however, the e-mail I receive tells me that the value is currently 0, when I can see that it is actually 2. Alert: I have tried ${CustomPollerStatus.RawStatus}…
I have been trying to build an alert that will trigger when a port on one of my HP devices detects a loop. I am using the MIB hpicfBridgeLoopProtectPortLoopDetected (1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2). The thing about this MIB is that it returns in a table. Each interface on the device listed generic number with a…
I have an alert set up on a Custom Poller to fire when the status of that poller reaches a certain number. It's monitoring the number of users on a a VPN. When it hits 22, the alert is supposed to fire. However, it's firing even when there are only 4 users, or 9 users, or other lower numbers. It doesn't happen all the time…
I am using Orion 9.1. We would like to monitor printer toner levels on HP printers. I did manage to create a few Universal Device Pollers specific to my needs. Now what I am looking to do is create an alert trigger to take 2 Custom Node Pollers, generate a percentage and then trigger an alert if the percentage is =< 10%.…
I’m looking for a way to create a poller that will give me switch stack information (i.e. how many switches are in the stack, 24 or 48 port switch, and base). I’m working with Synoptics switches. Thanks
After some hunting, I was able to add Failover status monitoring on some paired ASA units ([url=]Previous thread on ASA monitoring). I still have a couple questions. Is it possible to remove the "CiscoASAcfwHardwareInformation - Label" From the table? I would much prefer to just have the Hardware info and Status. Also, I…
It looks like you're new here. Sign in or register to get started.