The most recent content from our members.
Te2/6/14 Receive Power Sensor on XXXXXXXXXXX is Warning The Alerts and Hardware Monitoring events I get on many of my big Cisco Switches really clog the event log up... I hate the idea of turning hardware monitoring off but what causes these ten gig e to do this??? I've been told having fibers that are too short on 10 Gig…
Can somebody explain why the Hardware sensors goes into Warning state when the switch itself says everything's fine?
For Cisco Fabric Interconnect we have created several UNDP poller to show hardware information such as power consumption. Is there any way to create custom hardware sensor using OID's. & it should show under below hardware health view.
NPM: 10.6.1 IOS: 03.03.02SE Orion reporting 'Major' Warning on Temp Sensor 0 and Temp Sensor 1. Temperatures are well within their thresholds though so not sure how to get Orion to show this device in good health. I have read thread/52727 and checked MIBS .1.3.6.1.4.1.9.9.91.1.1.1 and .1.3.6.1.4.1.9.9.91.1.2.1. The…
Okay everyone so here is my issue. I work for a large ISP out of Minnesota and we just stood up a brand new all Cisco network consisting entirely of ASR 9K routers, specifically 9001's and 9010's. When first adding them to Orion before we upgraded to 11.5 we ran into a lot of hardware health alarms, mainly relating to…
I had a problem with Fan 1 on my Dell switch so I disabled that particular hardware sensor (using SAM 6.2 and NPM 11.5). The sensor shows as removed but the overall status of the fan still show red and the system shows as critical. thoughts? it's happening with more then one device.
We recently upgraded multiple solarwinds products, we are currently @ http://www.solarwinds.com/Orion Platform 2015.1.0, SAM 6.2.0, QoE 2.0, NCM 7.3.2, NPM 11.5, NTA 4.1.0, WPM 2.2.0, IVIM 2.0.0, VNQM 4.2 1995-2015. Post the upgrade I have approximately 50 Dell Servers/Blades/Chassis that now show a Hardware state of…
Getting these alerts: The links look like this: solarwinds.intranet.com/Orion/View.aspx?NetObject=HWHS:446 Clicking on them results in "Unexpected Website Error. Object HWHS:446 was not found in the database." Is there a solution for this?
I keep getting sporadic warnings/false alerts on 2 Dell PowerEdge M1000e Blade Server Chassis. The admin says there aren't any errors on the device. What OIDs are being used for these chassis sensors below AND what table(s) are the results stored in? * Blade subsystem sensor * Overall Chassis Status * Overall Chassis…
Hi, We're looking to make better use of the APM Hardware Monitoring and use the "Alert me when a component goes into warning or critical" however out of the box the default alert keeps sending out the same Device Details in the table. The alert correctly shows the part that's failed but the Model Number…
It looks like you're new here. Sign in or register to get started.