The most recent content from our members.
Hello! I would like the ability to import and export Config Change Scripts from the NCM UI. This would enable me to quickly build scripts in my test environment and then transfer them over to my production system, or to post them on thwack. Thanks
I have a pair of SSG550 and need guidance with the config to send traps/syslog messages to NCM. It is imperative that an alert be sent anytime any change is made on these systems. Thanks in advance.
I just wanted to ask before I head down this road, but has anyone found a way to perform a compliance audit where rules could query 2 separate nodes for specific criteria? An example of this would be to say that you wanted to verify that the lateral L2 trunk between distribution switches had the same vlans. Another would…
I expected the Upload Entire Config option in NCM to take my modified configuration of a node and make it the running configuration. Is that not how it works??? I want to make several changes to Cisco access point's configuration so I used NCM to download the current configuration. Then I edited the downloaded…
I am in need of pushing the following config to every router in my network ip dhcp pool vlan777 network 172.xxx.yyy.0 255.255.255.0 default-router 172.xxx.yyy.1 For store 1 the network would be 172.35.1.0 255.255.255.0 default-router 172.35.1.1 for store 2 the network would be 172.35.2.0 255.255.255.0 default-router…
Is there any way of configuring NCM to execute a command, generate a windows event or syslog when NCM detects a configuration change?We can only seem to be able to either configure an email alert or view a report. Does a file exist in the system which is updated with a log entry which we could monitor? The preferred option…
I have a Netgear GS724TP switch that I want to backup the config on , My Cisco switches are backing up their config ,without any problems I have SNMP working properly on my Netgear switch , the netgear switches are acknowledging requests , and I have the same switch configured with Network Performance monitor I'm fairly…
Hi all, I have RTCN working OK as per the admin guide, I am using SNMP traps when a user goes into config mode. The issue I have is that the Trap Server alerts are set so that when the running config is changed (HistoryEventMedium is 3) by the command line (1) the following program is executed:- "C:\Program…
With a zillion different ways to configure syslog messages, traps etc, I am asking what the community considers to be the optimum settings to send snmp / syslog to NCM for managing Cisco 6509's running either O/S or newer IOS. GOAL: To provide realtime configuration change monitoring in order to COMPLY... Specifically, I…
I was wondering if any one has had any success with creating a trigger that when a device comes online that it will upload or download a new config? We are trying to use on wireless devices that dont stay online very long but we are trying to capture the config do a diff and possiblbably load a newer config. Any help would…
It looks like you're new here. Sign in or register to get started.