The most recent content from our members.
We shut down our SW server back in December 2020, and recently created a new server running Orion/NCM 2022.3. We did a migration and are using the same SQL DB, so all our devices and rules remained in place. We have custom SNMP rules checking for the following: Varbind element with name SNMPv2-MIB:snmpTrapOID Is Equal…
I am using real time change detection with SNMP traps and I am getting all the right looking alerts but even when I make a change to the configuration I still get the message "no change detected, discarding config" I know that RTCD downloads the config when you first enter configuration mode, but it should be recognizing…
Hello all, Our system running with NCM 7.0.2. I enable real-time change detection settings in NCM and set download options as Running. And I use trap viewer to configure a rule to monitor config change traps. Once running change trap received, it will execute ConfigAutoDownload.exe to download running config so we will…
I have RTN working ok via the helpfile example, but I have an issue with syslogs. (forwarded syslogs) It works ok if the device send syslongs to my ncm server (with syslog server running) However due to the number of devices we have and traffic - they are all already setup to send to a central syslog server (unix, running…
Hi, I have tested the automatic configuration download triggered by syslog messages from a Cisco switch. However I do not seem to get the same working with a Procurve switch. I have configured both syslog and snmp and I do receive syslog messages and snmp traps from the Procurve switch. They are however "link up/down" type…
I just took a look at the release notes for NCM 5.5.2 and saw a note indicating that RTCD will not work with Windows 2008. Is that just for 5.5.2 or will it not work with Windows 2008 at all? All of our Orion software is currently installed on Windows 2008 systems and changing that isn't an option and Windows 2008 is…
Hi all, I have RTCN working OK as per the admin guide, I am using SNMP traps when a user goes into config mode. The issue I have is that the Trap Server alerts are set so that when the running config is changed (HistoryEventMedium is 3) by the command line (1) the following program is executed:- "C:\Program…
Hi Gurus, Is there an option in NCM where I can set email notifications on Real-time Detection in html format instead of the deafult text-based format? Thanks. regards, Reuben
So far I've used the Real Time Detection to set up config backups whenever a change is made and logged to our syslog server. Right now it is downloading the running config. I'd also like to be able to set it up so that when the SNMP Trap Viewer sees that a config has been written, it will trigger a download of that startup…
Is it poosible to configure Real Time Change Detection email alert in a manner that e.g. Change alert of 10 devices should be sent to user A, B and C and Change alert of another 10 devices should be sent to user C and D only. Can we configure email alerts in this way????
It looks like you're new here. Sign in or register to get started.