The most recent content from our members.
I’m trying to make a new template… I want to do an SNMP import of an Adtran TA5000. When I import it, there are TONS of things that I don’t want to monitor. There is nothing that I want to import past the node itself. I don’t have any Pollers, UDT ports, or Application monitors that I want to add yet… In fact we are…
We have a lot of Adtran switches that are not all available via a public IP that we would like to backup via CatTools (Device.Backup.Running Config). Anyway this can be implemented?
I am trying to setup Netflow to work with a Adtran NetVanta 1238 PoE switch so the data will work with NTA
I can't get cattools to enter into enalbe mode on my netvanta 5505 router. VTY access is fine, is "waiting for enable mode". Never mind. Just used a cisco router 2600 and it work fine.
I have an router interface that is 3 bonded T1 circuits, so the total bandwidth is 4.6 mbps for that interface. The graphs for the interface in NPM are fine. The graphs in Netflow are incorrect. We had a spike in usage. NPM graph was 4.5 mbps. The Netflow graph showed a spike of 60 mbps. I have it sorted for last 15…
Greetings Thwack Community, I am having trouble creating a custom poller in Orion to monitor our QoS queues (dropped packets, usage, etc). I have the proper MIB and OIDs from Adtran, and can create the custom poller in Orion, but the problem is that I have no idea what to do with the results returned and have a few…
Seems like the Adtran routers may not support IP SLA. Our company is installing 700+ of these routers. Do you know if Solarwinds plans to add support for other protocols on VNQM? We have a paid license of VNQM but may be forced to use a different solution...
We have several routers deployed with a single T1 WAN connection. When monitoring these routers over NetFlow, I'm noticing that they will show far more data than supported over the link. Here is an example: http://grab.by/42H9 No idea what is causing this, anyone have any clue?
I've found a bit of an issue when using NPM and NetFlow Analyzer together. Keep in mind, I would like to monitor as few interfaces as possible to keep licensing down. First, I set up NPM. I have 50 routers, and I added ONLY their T1 interfaces. I did this instead of PPP interfaces so that I could also get things like error…
I added an Adtran TA616 Gen3 device and I'm managing 4 interfaces: * Network T1 - ADTRAN TA t1[0] * Eth0 - ADTRAN TA eth[0] * Frame Relay Port - ADTRAN IAD Frame Relay Port * Frame Relay DLCI [6.528] - ADTRAN TA FrameRelayDlci[0.0] When I'm looking at the Node as a whole, the Network T1 and Eth0 show transmit/receive…
It looks like you're new here. Sign in or register to get started.