The most recent content from our members.
Hello there I got a weird issue. I have added all the interfaces including vlans to a load of Cisco 2960x switches but when I search for any mac addresses for devices such as Aruba access points connected to the Cisco 2960x switches they come up as if connected but when I open the UDT page for the device I don't get the…
We just updated to Orion Platform 2019.4 HF2 and there was considerable excitement about the new 'Device View' we had been reading about, that is, until we actually completed the upgrade. It was understood that the new 'Device view' was a technical preview and that switch stacks were not supported. But that was OK.... Our…
Hi there, In an environment with many cisco switches mostly Cisco 2960, I evaluate UDT endpoint function. Based on my investigation when the switch is configured properly endpoint discovery works fine, and the correct devices are shown on the switch page. Although this is the case, in the Active endpoint report which is…
Hi How do I use the firmware framework to upload that tar file like "c2960cx-universalk9-tar.152-7.E1.tar" upgrate and reboot I can see that I need to change NCM to know tar. in the advance
It looks like you're new here. Sign in or register to get started.