The most recent content from our members.
There is a table in the Solarwinds database called NCM_Cisco_CDP that we use to locate devices connected in our network. We would like one (or a couple) for LLDP that that includes Cisco and Juniper switches. The table can be named something along of the lines of NCM_Cisco_LLDP and NCM_Juniper_LLDP
Hello there I got a weird issue. I have added all the interfaces including vlans to a load of Cisco 2960x switches but when I search for any mac addresses for devices such as Aruba access points connected to the Cisco 2960x switches they come up as if connected but when I open the UDT page for the device I don't get the…
We'd like to be able to use lldp and cdp within our configuration files to view which devices are assigned to which ports.
The map details on the main page we have configured and added our switches. We have a mixed or hybrid environment with Cisco 2960-3750's and now Juniper EX series 2400 series switches. My issue is with the IRB uplink configuration NPM/NCM detects the uplink to the Cisco 6509 core switch. However, lawyer 3 information is…
Hi Does any one has Juniper gear that display IEEE 802.3ad interfaces (LAG) in Atlas or the new map from NPM 12.3?
I'm trying to figure out why my LLDP data isn't being utilized by NPM. I have Cisco L3 switches (Catalyst 3560E) with one or more rings of Moxa L2 switches (EDS-510A-3SFP) connected. LLDP is enabled on all L3 and L2 switches. The NPM Network Topology on the node details page for any Moxa switch shows only connections to…
ISSUE: Topology data is missing; whether IP, MAC, Hostname or VLAN data. PURPOSE: Guide to walk through a methodical way of identifying the issue and resolving the problem Products this Guide will address: * Network Topology Mapper * User Device Tracker * Engineer's Toolset tool Switch Port Mapper * Connect Now in Orion…
As a best practice, when I'm troubleshooting network issues, I typically start at layer 1 and work my way up the stack. If you've been managing networks for very long you've probably learned that the first three steps to troubleshooting a network issue are "check the cable, check the cable, check the cable..". Once you've…
Does anyone have experience with ExtremeNetworks Summit network switches and NTM? I've enabled LLDP with all relevant advertise TLV's but NTM doesn't properly show link properties. For instance link speed isn't detected at all (UNKNOWN) and a single link connection is shown as a trunk, e.g. actuall connection switch001:1/1…
Hi! Read somewhere that NPM & UDT stores LLDP information internally in its SQL DB, 1) is there a way to extract this information to show all the switches that has a LG-Ericsson device (VoIP - LLDP MED) attached to it? 2) Can the above information automatically be fed to NCM to automatically tag the VOICE VLAN on those…
It looks like you're new here. Sign in or register to get started.