The most recent content from our members.
Greetings all. Looking for the current location of the NCM Device Templates. I looked in the location detailed by the following (old) thread but don't see the table mentioned there. Where in NCM 7.4 are the device templates stored? Can someone in the community detail where NCM Device templated are currently stored? Running…
I'm running in to an issue when trying to use a pipe in a device template. Here is what I'm trying to have ran: <Command Name="Switch-Cisco-SSH" Value="ip ssh | include SSH Enabled|Authentication|Minimum|IOS Keys|Modulus" /> However, SolarWinds errors out when I test it and is unable to handle the pipe, at least in raw…
Am not able to monitor VPN in my paloalto. If i try to enable CLI monitoring am getting "Test Failed. Cannot enter Enable Level 0 : Unknown command: enable' then i have tried with the modified device template but still its getting failed. Poll for paloalto test is getting sucess but when i submit am getting error pop up…
I have the below in a device template for a cisco device, developing a custom template to download configs based on auditing requirements and attempting to define only what is needed for the auditors. The config type value im working with initially is below: Value="running | i username${CRLF}show running-config | include…
Hi, I created a working Device Template for Dell N-Series switches which also allows the usage of the NCM Firmware Upgrade feature. But the Upload fails with the following error message: "Upload to thwack failed. The server returned the following code: 500 - InternalServerError" Tobias
This thread had become too unwieldy at 78 pages in length, spanning across a decade, where most of the submissions had been implemented many years ago. I recently reviewed each and every posting in this thread, verified what had been implemented in-product, and which had not as yet been. I then logged any outstanding…
Hello, I need to create a device template for an Avaya 4850GTS switch. I've found a similar template that works for similar switches. The only difference is that for the 4850GTS switches, the Enter key is needed to be sent between entering the password and going into enable mode. Can anyone suggest how I'd add that to the…
Hey Thwackarians, We are beginning to run scripts to standardize the configuration of our APC UPS devices. As APC UPS devices are menu driven these scripts are just a collection of menu selections. These devices are running many versions of AOS, from 1.2.0 to 3.7.3. The scripts succeed on the oldest versions of AOS, but on…
Hi Folks, some of our Cisco 37XX Stacks prompt twice for a password. When we want to backup the Config we always get the error message "bad password" because the Process does not realize that the password has to be entered again. the Output is:…
Dear All, I am not able to login on Nortel switch through NCM,i have all ready given my correct Credential, Error show login faild at Banner, How the Pass Ctrl Y screen
It looks like you're new here. Sign in or register to get started.