The most recent content from our members.
Currently have Brocade SIlkWorm Switches that are polling in fine, NCM is testing as OK, yet when we attempt to back up the config it gives the error "Connectivity issues, discarding configuration (or configuration is too short)". Anyone had this issue? How do we fix this?
Hello, We're getting ready to purchase NCM and I was wondering if anyone is actively using NCM to manage configurations and/or push out firmware to the Foundry/Brocade/Ruckus ICX product line of switches, specifically ICX 7150, 7450, and/or 7550 models? Have you had any problems creating templates for use with these…
Hi all, We have a few Brocade Silkworm DCX Fiber switches. Is it possible to poll them via SSH and add the collected data as custom metrics in SolarWinds NPM (or SAM)? Reason I ask: it looks like these switches do not provide port error counts (a super important metric) via SNMP: * Brocade Fiberchannel Interface errors…
Anybody succussfully polling on version 30t.bin on the Brocade ICX 6450 with router code? I'm experiencing issues polling with SNMPv3.
Hi All, Need your input... 1. i have recently added 4 SAN switches and after discovery i dont see CPU, memory components identified... is anyone successful in getting it done via any other method. 2. In the Network Tab on the left side under the device, i see below details about connectivity Unit status and Sensor…
I have several brocade ICX series switches managed already in NPM, but I'm having issues getting SNMP configured on one in particular. I've tried to copy the SNMP configs from the other switches, but I still can't discover the last one. Anyone familiar with configuring SNMPv2c Community strings? I'm relatively new to the…
For using Solarwinds as a complete Storage Performance Monitoring Tool in a large Datacenter with a heterogeneous environment, it would be very important, aside of storage systems, to get Data automatically from Brocade BNA (Brocade Network Advisor) into Solarwinds NPM by an Interface supported by NPM and BNA (i.e. SMI-S,…
For using Solarwinds as a complete Storage Performance Monitoring Tool in a large Datacenter with a heterogeneous environment, it would be very important, aside of storage systems, to get automatically Data from Brocade BNA (Brocade Network Advisor) into Solarwinds NPM by an Interface supported by NPM and BNA (i.e. SMI-S,…
The SNMP OID 1.3.6.1.2.1.4.22.1 (IpNetToMediaType) on VDX platforms only reports ARP entries within the "mgmt-vrf" vrf but not the ARP entries within the default-vrf (global) irrespective of the VRF that the VE interface you are querying belongs to. That is, if you query the management IP (which is in mgmt-vrf) or a VE IP…
Thank you for choosing this document. You will need to create TWO Custom Properties for your Brocade Devices. Name the first column "C1_Device_Type" and include the following drop-down selections: L2SW - Layer 2 Switches IL3S - Infrastructure Layer 3 Switches IRTR - Infrastructure Routers PL3S - Perimeter Layer 3 Switches…
It looks like you're new here. Sign in or register to get started.