The most recent content from our members.
Hey, I noticed that it doesn't display an actual valid username on the email alert of our real time change notification. I have found some old posts where they ticked the box below, but this has not worked for us: Even though ours is already ticked, I still only get this below at the top of the email: Is anyone familiar…
Hi all, Just a quick question. Does the RT config changes only work on Informational and higher? and is there anyway to get it working on say 'warnings'. We are getting inundated with syslog messages when setting them to informational (which causes issues), so have started changing to warnings or alert, but this seems to…
Successfully configured real time change detection of a bunch of 7Ks. I get the email that a real time change was detected, but NCM doesn't kick off a configuration pull and change report. My IOS XE devices detect the change and then email me a change report. I'm wondering what I am missing to get this working properly?…
Hi all.. i already configure real-time change detection using snmp trap . device has been configure to send snmp trap to ncm and work . but when i try to running notepad.exe in alert action to test if it work but not work for me. i have read the documentation and follow the guide for this. any one can help me thanks.
Hi, I'm wondering how users are configuring their Nexus 5k/7k switches for enabling real-time detection? I have realtime detection enabled via syslog for my Catalyst router/switches and that works. The command I used on the Nexus switch is Logging server x.x.x.x 6. When I look at syslog in Orion, the messages are not…
Hi, I have Cisco Firewalls and Brocade Switches sending SNMP Traps to the NCM server. I would like to know if there is a way I can setup NCM to send me alert Emails as soon as someone logs onto the devices, or issues any command on the device in Real Time. Thanks
I have a pair of SSG550 and need guidance with the config to send traps/syslog messages to NCM. It is imperative that an alert be sent anytime any change is made on these systems. Thanks in advance.
Hello all, Our system running with NCM 7.0.2. I enable real-time change detection settings in NCM and set download options as Running. And I use trap viewer to configure a rule to monitor config change traps. Once running change trap received, it will execute ConfigAutoDownload.exe to download running config so we will…
Ive seen some old posts related to these feature, but nothing that seems to resolve the current issue I see. I have this feature setup, and it seems to be working quite well - I am testing both the Syslog and SNMP versions. In either one, the "Username" comes back as "RealtimeNotification" and just below that, I get the…
Hi all, I have RTCN working OK as per the admin guide, I am using SNMP traps when a user goes into config mode. The issue I have is that the Trap Server alerts are set so that when the running config is changed (HistoryEventMedium is 3) by the command line (1) the following program is executed:- "C:\Program…
It looks like you're new here. Sign in or register to get started.