The most recent content from our members.
We have some device that only can provide snmp trap to send out status, can SAM receive those trap and setup alert?
I'ved set trap rule to send an email on Trap viewer when configuration has changed or something went down. I did not recevive anything, but found log in current trap.
I am trying to set up an SNMP trap alerting rule for my power distribution unit (PDU). The PDU has power and environmental monitoring capabilities and network functionality that can send alerts (such as SNMP traps) if certain thresholds are breached (e.g. if temperature goes too high, send an alert). I want to be able to…
Hi, Does anyone know of a website or resource that explains - in plain language - what different SNMP traps do? We're just starting to implement SNMP-based monitoring and I'm trying to decide which SNMP traps we want to configure on our routers and switches. But then I Google a trap like "snmp-server enable traps rep" or…
Folks, We're configuring a teleconferencing center here, and we're planning to use Solarwinds to handle some or all of the hardware monitoring. Most of the hardware can raise alerts using SNMP traps. Obviously, Solarwinds can catch SNMP traps and take action. However, they're also asking if we can receive traps from one…
We have configured thresholds alerts in SolarWinds SRM for capacity, peformance of storage devices. The trigger actions are email alert and SNMP trap forwarding. For trap forwarding, we have provided IBM Netcool as remote trap destination. On Netcool side, they are able to receive the traps but cannot parse it as it is…
Hi All, Can someone please let me know if SAM alerts can be forwarded to third party monitoring tools via SNMP Traps? Additionally we have NCM, NPM, IPAM modules, we would even like to forward all the alerts to NMS as traps. Appreciate if you can share any documentation or steps to forward the traps. Thank you!
I am having an issue collecting SNMPv3 traps from certain device types. I am running NPM 10.2.2. I have already read other threads that state the the SNMPv3 username and credentials must be the same for the management of the device and for sending out v3 traps. All of that is correct. I am getting SNMPv3 traps from Cisco…
Just starting to go through setting up alerts based on traps .. 2 questions 1) Is there a way to reference custom fields in the trigger? I want to be able to check if the device is marked _HUSH (no alerts) 2) Does anyone have a pre-filled, recommended set of alerts for say cisco or other devices? I'm surprised there isn't…
I have an application that is sending SNMP traps. Sometimes the traps are recieved by Orion. Sometimes they are not. I have narrowed the issue to the timestamp field in wireshark. for example If the timestamp field is (base10) 8625822 encoded as 0x[43 04 84 8e bd 1e] Orion recives the trap. Orion Displays…
It looks like you're new here. Sign in or register to get started.