Get the latest news about SolarWinds Network Configuration Manager (NCM)
Our SMTP server is configured correctly on Solar Winds Orion, as I was able to receive a test email. Did the same configurations in the Config Change job settings at contact / email server address page. Ran job and checked post-report. Run into an error saying "Unable to send a notification email, failure sending email".…
My company has two SW Orion deployments - One for our production environment and one for our DEV. Both of the deployments are running Orion Platform HF4, NCM HF1, NPM HF3, NTA HF2, UDT HF3: 2020.2.6 Today, I had noticed that for the End of Support & End of Sales Lookup page, in the DEV environment, it has a banner that…
Hello everyone I would like to use NCM to go through our network to ensure that all of our devices are sending traps to our current Solarwinds server. The problem is that our current configs aren't uniform and we have different snmp servers configured on different devices. For example, one switch will have: snmp-server…
I have spent a fair bit of time trying to get SCP working for the firmware upgrade operation since TFTP has been very slow on the network and I am hoping SCP will make an improvement. I have successfully used TFTP for the firmware upgrades in the past no issues aside from the speed. I have ensured that the transfer method…
Validation Failed: An error occurred during script parsing. Position: Line 1, Character 10 Error message: no viable alternative at character '|' Please check script syntax. show run | i 2757 show run | i 10.129.0.192 This is a valid Cisco command which is doing a search through the running config for any lines that contain…
Hi All, I am looking for an answer that is relating to thread below which unfortunately is still unanswered. https://thwack.solarwinds.com/product-forums/network-configuration-manager-ncm/f/forum/39904/rest-api-query-node-serial-number-or-uuid Hope it will be answered now. kt617 did you manage to find any working solution
Would anyone be able to assist with guiding me on creating a job/task to schedule the refresh suggest dates data from the EoS lookup? Would it be possible to do this or is that something that has not been implemented?
When you add a new node to Orion (with NCM installed) there's a selection to choose to add it to NCM (or not add it). If you choose to 'add it to NCM', is there a way to get NCM to perform an immediate configuration download on its own, just by adding/saving the node into the system ( i.e. it performs an initial download…
Hi all, I have a Netgear M4100-26G that we have added to NCM and i have a small issue in the fact that getting the running config you go into enable mode and then do show running-config. for the startup configuration you do 'copy nvram:startup-config tftp://<server-ip>/filename.cfg' I do see there is 2 config types. 1 for…
I want to ensure all my devices have the same configuration settings for portions of the config and be alerted when it changes. When is it best to use baseline management vs compliance features of NCM for this?
It looks like you're new here. Sign in or register to get started.