Get the latest news about SolarWinds Storage Resource Monitor (SRM)
Hi, i have a small report that give me license usage ans the saturation. This can be easily found with SWQL usin Orion.LicenseSaturation table. This is nice except that the license information for SRM is not present even if is it well listed in the Orion.Licensing.Licenses table. In order to have a complete report can…
Hi, We have recently had a loss of connectivity to one of our Storage Array. We have an alert on the NAS volume for their status not equal to Up. As soon as the Storage Array was not up all the NAS Volumes were not Up anymore and trigger the alert. The storage array was up again 10 minutes later I like to setup an alert…
Is someone able to help me adding Dell PowerVault MD3200, MD3220i and MD3400 to SRM? We had to update the RAID controller firmware on our MD3400s to v08.35 and now the Dell SMI-S provider won't add the MD3400 arrays to the CimServer using the command line. It fails with an AddArray exception code 4. The CimServer I have…
Hi All, can anyone point me in the right direction to create a volume report for Figures: Min, Max, Average latency per volume Min, Max, Average Read IOPS per volume Min, Max, Average Write IOPS per volume Graphical: Latency every 5 minutes 24 hour scope Per volume Read IOPS every 5 minutes 24 hour scope Per volume Write…
Hello, Hopefully one of you report guru's can assist me in creating the following chart in one of my reports. I have an array that has 3 storage pools (all-ssd, all-fc and all-nl). I would like to do a stacked column chart to show each pool (Free Space / Total Space) per pool For Example all-ssd…
When building an Alert Trigger Condition or Inserting a Variable into an Alert Trigger Action for a SRM "File Share" object, the available Fields to select are quite thin, especially for a new state-of-the-art module like SRM. I'd expect it to have at least the features of similar objects that other modules have, like a…
Hi All, Has anyone managed to set up NetApp OnCommand Unified Manager for Clustered Data ONTAP? I get to adding in my Operations Manager but the creds always fail. I have logged into it Oncommand system manager fine and have tested an admin account but it always fails on the above screen. I have found this SRM: Enable a…
Has any interfaced SRM with storage that uses a SCISI interface. If so how does it work and is it fairly straight forward? Can you point me to the documentation that can walk me through the process? Thanks
Hi All When adding a SMI-S provider via add storage device i get the following error "There was no response from the SRM Service Engine located at "servername:17777" The server is an additional poller installed in another site. If i was to use the main poller i get no errors. Windows firewall disabled on both pollers and…
Similar to the Storage Pool Growth Report below, just extended out to show data from 60 and 90 days ago
It looks like you're new here. Sign in or register to get started.