Get the latest news about SolarWinds Kiwi CatTools
Hi, Has anyone configured HPGbE2c switches for blade enclosures on Cattools? We have a lot of blade switches here and I have upgraded FW on switches to virtually the latest version (5.1.2). I was able to get configs off a couple of switches by switching to ISCLI mode (virtually IOS). As soon as I put an enable password on,…
Hello. I have problem with mass expired password update in cattools database. I have about 1500 devices and different credentials in about 20% of them. How to do mass password update only for specific user? Only thing that comes to my mind is select by hand devices where is that user with expired pasword, but this is not…
Hi there, I am running Cat Tools 3.3.17 and trying to backup all my device configs to one server. I am having an issue with 2 HP switches - I receive a Failed to connect to 172.x.x.x Reason: (30016) Invalid username or password reported by server, or bad private key.. Giving up after 3 connection attempts. I am not too…
Has anyone been able to successfully back up UCS 6200 F/I or Delll Force 10MXL switches using cattools? If so, would it be possible to share the configuration that was used. Thanks, Dan
Has anyone been able to create a device template to properly backup a Cisco UCS 6200 series fabric interconnect with CatTools? There seems to be some threads about using NCM, but not for CatTools. I was wanting to look at how the "Cisco.MDS.Fibre" script is done, but alas - these are encrypted, and I cant see anything…
Trying to get my SonicWall firewall NSA5600 config to back up via CatTools. Seems that everything I try doesn't work. It's trying to enter the wrong commands for displaying the current config. Anyone else having these issues?
I am trying to use the Device.CLI.send.commands activity to initiate a TFTP backup from a custom device. I would like to use the hostname to name the tftp upload file. Can someone point me to how to do this. The current script is: netsave text-config 192.168.24.64 %hostname%-%date%.cfg but this is not doing the variable…
Hi, I'm trying to run commands on Redback.router but i get this error : Connect failed:(-32534) Disconnect : Protocol error I use SSH2 Method and when i click Telnet/SSH from the device, it open the connection corectly with Secure-CRT (with SSH2..) I'm running 3.10 version of the cattools. do you know what could be the…
I am currently trying to set up KiwiCatTools to take a Device.Backup.Running Config of my current Microwave Links which are NanoBridge M5, I have CatTools working for Dell /Cisco and HP Switches. Following the advice in this discussion Re: Automate backup of config from Ubiquiti NanoBridge M5 (DD-WRT) , I set the devices…
I am running into an issue and I can quite pin it down. If I try to run a wr mem command to all my devices if I run more than ten threads at a time the whole process drags to a crawl. The network utilization isn't very high and cattools is running on a fairly new dell poweredge. Has anyone else ran into the same issue, or…
It looks like you're new here. Sign in or register to get started.