pancamo

Comments

  • We have SW on our NOC Screens... I don't know much about video switching, but im sure many solutions exist. I'm still trying to find a way to keep SW from timing out. The highest setting in SW is 1440 minutes. quote:Originally posted by Network_Guru Aside from the burn-in problem, you could use a separate PC for each…
    in Multiple NOC Plasma Displays for Orion Comment by pancamo August 2004
  • Anyone know where I can find a free version of nProbe?
    in nprobe Comment by pancamo May 2008
  • while we are on the subject.... Currently if I want to need setup a UP/DOWN alert for our email team, sqlserver team, network team, unix team, etc... I have to create a different alert for each team and select just their servers... with 1000's of servers this is impossible to maintain, and each time I add a server, I have…
    in Groups and/or alert parenting Comment by pancamo September 2004
  • can you post the contents/schedule of the job(s) here, and how do you turn off the nightly maintenance? quote:Originally posted by ralf.hessberger Dear Rob and pancamo, we're operating a SL2000 and keep data up to a year. In former times we had 5-6 GB of mdb file, then I created a maintenance job on the SQL-Server, since…
    in Database shrink Comment by pancamo November 2004
  • We also have a 30GB mdf file database and a 25GB ldf file... And we are also having nightly database problems where we loose 1-2 hours worth of pollings.. If the nightly job and/or "shrink" portion can be run once a week, I also would like to know how... Web Server USHOUSOLWNDS01 Operating System Windows 2000 Advanced…
    in Database shrink Comment by pancamo November 2004
  • v5.0.7 is the last version that I know of that works for disks... later versions hang when polling the disks.quote:Originally posted by cherrypicker I'm currently testing with net-snmp v5.0.9 - Orion is not detecting disk/swap space resources. How did you got it to work? Any help will be greatly appreciated. Andy
    in net-snmp 5.1 Comment by pancamo February 2005
  • We have noticed that restarting the SW service actually causes most of our Buffer Misses during the SW calibration... quote:Originally posted by iunderwo That's an issue best addressed w/ Cisco. However, you might want to baseline what SW is observing. Some buffer misses aren't too bad in and of themselves, but a sudden…
    in Cisco Buffer Misses Comment by pancamo August 2004
  • I think the SW Session Timeout setting may override the auto-refresh. We auto refresh, however still get logged out. I just today raised the value to from 60 to 1440 minutes (the max, one day)... We'll see... quote:Originally posted by iunderwo NTLM can work with Orion provided you're not doing anything funky with…
    in No Web Page Auto Lockout Comment by pancamo August 2004
  • maybe just a syntax problem? Ya need spaces in the the SQL statement SQLResource.SQL="Select * From Nodes Where Severity>0 " & " MachineType = 'Wellfleet' " & " Order By Severity Desc, PercentLoss quote:Originally posted by dsullinger I have made a copy of ProblemNodes.Resource and renamed it ProblemRouters.Resource. I am…
    in Need to Modify ProblemNodes.Resource Comment by pancamo January 2005
  • Several major problems with the network discovery... 1. It's a manual process 2. It's DOG(hours) slow when adding the devices to a large database 3. If you rename a node, discovery creates a duplicate node 4. NO IMPORT FEATURE 5. You have to go back and manually add cpu/storage monitoring (good luck finding which ones were…
    in Adding Nodes to SQL Database Without Using the GUI Comment by pancamo November 2004
  • Two minutes vs 20 seconds... Several different groups add/update/delete several hosts a day. A simple web interface would be nice and quick... Also a bulk add feature is DESPERATELY needed. dp quote:Originally posted by mjhamilton Just out of curiousity more than anything else... why would you want to do this and not use…
    in Adding Nodes to SQL Database Without Using the GUI Comment by pancamo November 2004
  • It would be great if you could do it via the web page! quote:Originally posted by cshiver We recently migrated our SLX database from the desktop engine to a MS SQL server and are greatly expanding the number of nodes and interfaces we're tracking. Has anyone come up with a way to add nodes and interfaces to the NetPerfMon…
    in Adding Nodes to SQL Database Without Using the GUI Comment by pancamo November 2004
  • going back to net-snmp-5.0.9 works for us also. quote:Originally posted by cmccabe 5.0.9 does not suffer this problem. Solution found here: groups.google.com/groups E-mail thread included for posterity: ============================================================ Go back to net-snmp-5.0.9 and it works. Thanks, Chaz System…
    in Monitoring Disk Usage on Sun Solaris Comment by pancamo August 2004
  • well, it works... for a few minutes... after selecting the volumes, the snmpd agent hangs during the first poll... truss on the snmpd process shows it hanging on open(/etc/mnttab, and llseek(12... calls "snmpwalk -c COMMNUITY localhost host" works fine. solarwinds is doing something that is hanging the…
    in Monitoring Disk Usage on Sun Solaris Comment by pancamo July 2004
  • Finally got it to work by configure'n with --with-mib-modules="host... configure --with-default-snmp-version=2 --with-mib-modules="host disman/event-mib ucd-snmp/diskio smux agentx mibII/mta_sendmail" --with-sys-contact="NCG UNIX 713-806-6118" --with-sys-location="1301 Fannin Houston, TX 77002 10th Floor Datacenter"…
    in Monitoring Disk Usage on Sun Solaris Comment by pancamo July 2004
  • Same problem here... using Net-snmp 5.1.1 quote:Originally posted by ckchang Hi All: I have installed NET-SNMP on a Sun UltraSPARC 1 machine and configured the snmpd.conf file to include the includeAllDisks directive, but I still can't get any disk volume usage from it through Orion 7.2.2. Has anyone encountered this…
    in Monitoring Disk Usage on Sun Solaris Comment by pancamo July 2004
  • if you have the $$, www.opnet.com's ITGURU has the best capture solution on the market. It's paid for itself 20 times over... It's an agent on the server that captures when you tell it to and transfers the capture back to the console.. You can capture from several tiers at the same time and merge the traces. It will also…
    in sniffer / packet capture Comment by pancamo September 2004
  • do you have a problem with snmp hanging on volumes in 5.2? quote:Originally posted by DarrenJeffrey I have downloaded net-snmp 5.2 source code onto one of our Solaris 9 boxes and after reading the readme.solaris from the package and following Bruce Shaw's excellent information). Here are the exact commands I used to build…
    in CPU monitoring for Sun systems Comment by pancamo December 2004
  • Our maps in 7.4 are not showing either, all we get is the number "2" where the map should be... 7.3 worked fine. We upgraded to 7.4 (we did not install the the new web site) quote:Originally posted by SolarDustRider We recently installed the 30 day trial version of Orion on a Windows 2003 System running MS SQL 2000. With a…
    in Maps do not show up Comment by pancamo August 2004
  • It's a bad idea to not allow ICMP... Our firewall guys tried this and it ended up causing major problems when retransmissions occur... ..this totally breaks things like MTU discovery... quote:Originally posted by Malvado All of our user segments are remote and are behind routers / firewalls, as a result none of the…
    in Detecting Node Status Comment by pancamo July 2004
  • Make sure you set the return address in the alert to a valid email address. Setting the return to an unknown email address (joe@nobody.com) caused our alerts to stop working... quote:Originally posted by francismcphail Version: Orion 7.3 (I've reported this to support but through I'd post here to see if anyone could advise…
    in Alerts Stopped Functioning & Other items.. Comment by pancamo August 2004
  • I'm looking for the same solution.... any solution yet? quote:Originally posted by webberb I would like to link directly to the node details page from another NM web based application, currently when I select the Node Details page this is the URL: NetPerfMon/View.asp?View=NodeDetails&NetObject=N:26 Looks like it passes a…
    in linking directly to Node Details page By NAME Comment by pancamo June 2004
  • We use kiwi to write to the DB also.. and... I have written a custom .resource(see example below) to select the last XX syslogs, then we added the resource to the Node Details page... Also, I have a custom .NET app that uses a grid that allows us to quicky group/sort/filter syslogs, traps, and soon NT eventlogs the grid…
    in Integrating KiwiSyslog.... Comment by pancamo August 2004
  • A complete Auto Discovery environment for large environments. Basically I would like a auto discovery tool that will allow the administrator to manage changes daily. Discovery would run 24/7 (required) and show changes to the network/servers and allow the admin to turn on or off monitoring very quickly.
    in Orion Wish List – Top 5 features Comment by pancamo November 2006
  • same results here. I have been able to update the Nodes table with the unmanage settigns, however the poller does not pick up the changes quote:Originally posted by iunderwo It would be particularly nice to unmanage a node from the web interface, instead of on the poller...and I've been looking at how this can be done, but…
    in Feature Request - Sign Up Comment by pancamo July 2004
  • The Unmanaged node never automatically returns back to Managed after the pre-defined time.... Is a SQLagent job or stored proc required to do this? I also tried updating the Node table, and the Web site updated, however the GUI didn't update and must use some other flags for this.. quote:Originally posted by pancamo Works!…
    in Feature Request - Sign Up Comment by pancamo July 2004
  • Works! You have to right click on the node, and select Node Details. There will be a UnManage button on the right. Still testing, but so far, so good... Why is this hidden? dp HKEY_LOCAL_MACHINE/SOFTWARE/SolarWinds.Net/Orion Network Performance Monitor /Settings Allow Unmanage REG_SZ True quote:Originally posted by…
    in Feature Request - Sign Up Comment by pancamo July 2004
  • I tried setting "Allow Unmange" and then "Allow Unmanage" String value to True, however no Unmanage menu item appears after restarting the solarwinds sevice... Does this require a reboot? thanks! dp quote:Originally posted by Janis1 There is an unsupported feature within the Orion Version 7 software that enables you to…
    in Feature Request - Sign Up Comment by pancamo July 2004
  • Why is it unsupported? We really need this feature also... I'm currently looking into adding the feature in the web console myself. dp quote:Originally posted by Janis1 There is an unsupported feature within the Orion Version 7 software that enables you to temporarily unmanage a device. To set up this feature, you will…
    in Feature Request - Sign Up Comment by pancamo July 2004
  • Currently, I'm stuck creating the same view each time I want a view with differnt group of nodes. I always create the same view, but I have to manually edit each resource filter.. I would like to create a generic view, then send a specific query... Example1: solarwinds/.../View.asp Like '%CITRIX%' Example2:…
    in Feature Request - Sign Up Comment by pancamo June 2004
Avatar