pacetti

Comments

  • ...this forum is fun for the whole family... From: SolarWinds Community Team Sent: Thursday, December 12, 2013 3:44 AM To: Pacetti, Andrew Subject: Re: - New NPM Documentation Now Available; Seeking Suggestions for More thwack<thwack.solarwinds.com/> New NPM Documentation Now Available; Seeking Suggestions for More new…
    in New NPM Documentation Now Available; Seeking Suggestions for More Comment by pacetti December 2013
  • kweise, From this post, it's not clear what your issue actually is. The following issues related to reports were addressed in SP1: * Reports are now grouped and sorted consistently between the web console and Report Writer. * Sorting on the Last 250 events report no longer generates a "No activity to report" error. * The…
    in v10 Issues getting real annoying Comment by pacetti July 2010
  • ecklerwr1, You are right; you should be OK: * NTA 3.6 RC3 bits did end up being the same at NTA 3.6 release bits. * NPM 9.5 SP2 should upgrade straight to 9.5.1 without a problem. * If your license is current, and you are staying with the same hardware, it should upgrade automatically. * Completing the configuration wizard…
    in Upgrading NPM from 9.5. to 9.5.1 Comment by pacetti February 2010
  • cfeltych, Basic alerts can not be acknowledged. If alert acknowledgment is a requirement, you will have to use Advanced Alerts. For more information, see "Creating and Managing Alerts > Creating and Configuring Advanced Alerts" in the SolarWinds Orion NPM Administrator Guide.
    in Want to be able to acknowledge alerts in web interface Comment by pacetti October 2010
  • sky2010, To be clear, SolarWinds strongly recommends that you have two servers in place. One to host your SQL Server and a second, separate server to host your Orion NPM + modules installation. For more information about Orion NPM Server requirements, see "Installing SolarWinds Orion Network Performance Monitor : Orion NPM…
    in problem with configuration wizard! Comment by pacetti July 2010
  • Yes, that key piece of info is missing. I will update it, post-haste.
    in MIBs with NPM Comment by pacetti May 2011
  • If you are currently running your modules on Orion NPM 9.5, you should upgrade to 9.5.1 first, complete the configuration wizard, and then complete modules upgrades and configuration. As Marie indicated, module documentation should provide upgrade instructions.
    in Upgrading NPM from 9.5. to 9.5.1 Comment by pacetti February 2010
  • * Log in to the web console as an administrator. * Click Settings in the top right corner. * Click Polling Engines in the Details grouping.
    in NPM 10--monitoring of ESX 4 Servers Comment by pacetti May 2010
  • In that case, your next step would be to open a technical support ticket and reference this thwack post, so we can look at your environment. In order to receive technical support, you will need to be current on your SolarWinds maintenance. Complete the form. You will not be able to upload your Orion diagnostics, but you…
    in Where do I pick up the view CBQoS details Comment by pacetti February 2010
  • You can copy them over at any time. As soon as you copy them over, you should see them as fields on the Edit Properties view for any managed node (Click Admin > Click Manage Nodes > Select a managed node > Click Edit Properties).
    in Pollers doubt Comment by pacetti October 2009
  • In this case, you should only need to backup NetPerfMon (NPM) and ConfigMgmt (NCM). Note: NetPerfMon is no longer in use as the default database name in current versions of SolarWinds Orion products. HTH,
    in backup/restore best practices Comment by pacetti January 2012
  • SOcchiogrosso, You may find what you need in the following Knowledge Base article: "How do I enable SNMP on VMware ESX Server version 4?"
    in VMware vSphere 4 (ESX 4), can we monitor them like VI3's ESX 3.x? Comment by pacetti April 2010
  • The following section the SolarWinds Orion NPM Administrator Guide should answer your question: "Downloading the SolarWinds MIB Database" Note: If your device is not already been added to our MIB database, you will still need the UnDP. To get your new device in our MIB, add your new device to this thread: "Tell us your…
    in MIBs with NPM Comment by pacetti May 2011
  • Pablo, The Configuration Wizard provides an opportunity either to specify an existing SQL Server and instance or to create a new one to use for your Orion installation. For more information, see "Installing Orion Network Performance Monitor" in the SolarWinds Orion NPM Administrator Guide.
    in Starting Solarwinds All over again Comment by pacetti December 2010
  • Mike, Unfortunately, i can't help you with the F5 setup, but I can tell you that you should not have any problem running your AWS on a virtual machine, if your VM meets the minimum requirements laid out in "Requirements for Virtual Machines and Servers" in the SolarWinds Orion NPM Administrator Guide. HTH,
    in Installing Additional Pollers and an Additional Web Server Comment by pacetti November 2011
  • Dojs, You may find these KB articles helpful: * Enabling SNMP on VMware ESXi, ESX 3.5 Server, or ESX 4.0 Server * How do I configure my Cisco devices for SNMP v3? * Setting up the snmpd.conf file * How do I add an SNMP v3 Node? * Why are my interfaces changing to "unknown" status, even when I know they are active? *…
    in Lots unknown Comment by pacetti July 2011
  • warbird, Orion NTA does handle NetFlow v9 flows. For more information about required field types, see "NetFlow, IPFIX, J-Flow, and sFlow Requirements" in the SolarWinds Orion NTA Administrator Guide.
    in re: IPv6 Comment by pacetti February 2010
  • Ben, What version of NPM are you currently using. I have just confirmed that the MIB provided with the latest version (10.0 SP1) does indeed recognize the OID you are trying to use, as shown in the following screencap: For reference, the OID description is as follows: Logical Drive Status. The logical drive can be in one…
    in The OID is not supported Comment by pacetti June 2010
  • karim1, You should find what you need in the chapter "Monitoring MIBs with Universal Device Pollers" of the SolarWinds Orion NPM Administrator Guide, specifically, step 11 of the procedure in section "Creating Universal Device Pollers" may prove useful. HTH,
    in Display universal device poller Comment by pacetti May 2011
  • You got this error while installing the 10.0 additional poller? The SolarWinds Knowledge Base article, "I am having a problem in the Configuration Wizard." has the following to say about your error: Issue: While completing an upgrade of Orion NPM on an additional polling engine, I see the following error: Services…
    in Upgrading to v10 from 9.5.1 Comment by pacetti May 2011
  • Click Download Now for NPM 10.1. You should get the new installer: SolarWinds-OrionNPM-v10.1.1.zip.
    in NPM 10.1.1 Release Candidate Comment by pacetti December 2010
  • I'm afraid you are going to have to ask the person responsible for your CBQoS config to confirm that your CBQoS policies were applied to the interfaces you require. As a general rule, we are not able to assist with your specific CBQoS configuration.
    in Where do I pick up the view CBQoS details Comment by pacetti February 2010
  • bobross, We do what we can...sometimes we even go outside to see what that might be like...
    in Linux Memory Utilization Monitors and You Comment by pacetti March 2012
  • rgward, Our Project managers will see this request. Thank you,
    in Network Discover Ignore List Comment by pacetti September 2011
  • Network_Guru, Both upgrade paths are supported. The support rep was giving you the "belt-and-suspenders" recommendation. As for migrating your maps, see the SolarWinds Knowledge Base article,"Moving Older Map Maker Maps" (http://knowledgebase.solarwinds.com/kb/questions/2676/Moving+Older+Map+Maker+Maps). HTH,
    in NPM 9.1 to 10 Upgrade Path Comment by pacetti September 2011
  • The .pdf ecklerwr1 provided is a pull-out of the chapter "Alert Variable and Examples" from the Orion NPM Administrator Guide. For future reference, updates to the alert variables list are regularly provided in the "Alert Variable and Examples" chapter of the Admin Guide, and supplemental documentation like this pull-out…
    in Alerts: may need escape character for variable Comment by pacetti January 2010
  • goofyzig, It sounds like you need to add a Universal Device Poller resource to your Node Details views. You should find the procedure to add any resource to your Node Details views in "Managing the Orion Web Console | Customizing Views" in the SolarWinds Orion Network Performance Monitor Administrator Guide. The resources…
    in Custom Poller Resources Comment by pacetti December 2009
  • In 9.5.1, the report header is header.jpg in \Program Files\SolarWinds\Orion\Common\WebResources\
    in Customising Reports Comment by pacetti February 2010
  • turbo79 et al., I've attached the latest guide. The update will post to the web as soon as possible. Thank you for the notification,
    in Network Atlas Administrator Guide Comment by pacetti July 2011
  • See this section of the Release Notes, specifically.
    in after upgrade to 10.1 - getting tons of missed polls and general bad performance Comment by pacetti December 2010
Avatar