greg

Comments

  • bleearg13, I have been so busy I haven't had a chance to setup Rancid. Would you be willing to send a list of the RegExs that you would like to see in Cirrus? Would anyone else? Please post here if you have some... Thanks! P.S. Compare RegEx's are headed to testing, Won't be long now.
    in Cirrus Discussion Comment by greg November 2005
  • Wills, I think we have addressed that issue, I am just waiting for confirmation from the testing group before we release the patch/new build. Would you like to test the patch for us as well? Thanks, Greg
    in Scheduled Config Download -- Timeout. Comment by greg November 2005
  • SnowJay, That issue has been addressed in the latest build, which is being pushed to the download server right now. (11/17/2005 0830 Central) Please download the new install package and try your downloads then. Thanks, Greg
    in Newest Version is crashing Comment by greg November 2005
  • Yup, thats addressed in the upcoming build, due out 11/8/05. Thanks, Greg
    in Newest Version is crashing Comment by greg November 2005
  • dforeid - The first thing I would recommend is upgrading your Toolset; we are currently shipping 10.4 and have made major changes to the SwitchPortMapper (see the Workspace Studio version). HTH, Greg
    in Switchport Mapper doesn't display MAC/IP/DNS on some Cisco 6513s Comment by greg January 2010
  • Olimpia - can you contact support and submit a packet capture of the SNMP traffic to the device? Also, what happens if you manually start a TFTP config download via CLI on the device? Thanks, Greg
    in More TFTP Woes - No Config Info on Router Error Comment by greg May 2009
  • Startlog, It looks to me like you are sending the wrong path to the pix... If TFTP-Root is your root folder for the TFTP Server, then no path spec would be neccesary. If there is a designated TFTP server set in the PIX config, change it to have no folder OR use no folder when giving the 'write net' command: Use: "write net…
    in File Open Error 3 Comment by greg August 2004
  • I can answer those for you, but it really sounds like you are asking for more functionality than the Toolset can give you. As I will mention below, our Orion product would probably be a better fit your your requirements. Here is a demo... Is there a limit to the number of gauges I can auto publish to the web? Yes - 31…
    in Auto Publish to web--bandwidth gauges Comment by greg August 2009
  • WifiGod - On Cisco and some other devices, the @ symbol designates a VLAN context to retrieve information from (think bridge MIBs). See: www.ciscointernethome.net/.../fcf014.html Search for '@' HTH, Greg
    in Bandwidth Gauges Bug w/Symbols in SNMP Strings? Comment by greg April 2010
  • Mithrilhall, We have addressed this issue in the latest build, which should be posted tomorrow morning (11/8/05). Thanks for your feedback! Greg
    in Possible Bug Comment by greg November 2005
  •  dmel - There are two places to get the bridging information: RFC1493-MIB:dot1dTpFdbTable and the Q-BRIDGE-MIB:dot1qFdbTable. The 9.2 version of SPM only supports the first, whereas the latest (currently in beta) supports both. You might check what tables you device supports. HTH, Greg
    in Linksys SRW2024 not support Bridge-MIB? Comment by greg October 2008
  •  Oqtoe - either the file is missing or corrupted. If the file is missing, you can run a re-install / replair to replace it, otherwise, you will need to find the file (usually in %Program files%\SolarWinds\Engineer's Toolset), delete it, then run a re-install / repair of the Toolset. HTH, Greg
    in MDAC Error - Error #91 - Cannot open SWDiscovery.cfg Comment by greg July 2008
  • Bryan, Excellent suggestion, I will see that it gets into an upcoming release. Thanks, Greg
    in Config Change Report Comment by greg February 2006
  • gbrance, There is currently not a way to sort the output on the Config Change Report, but we are working to get that in on one of the upcoming releases. HTH, Greg
    in Config Change Report Comment by greg January 2006
  • cvonhassel - We did... That feature is working in the Classic version of the SwitchPortMapper, and it will coming to the Workspace Studio version soon... Right-mouse click the interface, and based on the admin status of the interface, you can admin enable or disable the interface. HTH, Greg
    in Ok, I really like version 10.0 and the Workspace Studio but... Comment by greg March 2009
  • fleic0ma, As Bryan says, it is the biggest limitation of the TOOLSET. Have you seen Orion? Orion stores data on SQL server, which does not have the 2GB limit, and is developed and tuned for monitoring larger networks than the toolset. www.solarwinds.net/.../index.htm Thanks, Greg
    in Database Size Warning Comment by greg November 2005
  • rmmagow - What message are you getting when you contact the server to obtain a license? --Greg
    in Licensing problem Comment by greg February 2009
  •  SWRicardo - You can enter =*8 in the units field to multiply the value by eight. HTH, Greg
    in SNMP Comment by greg June 2008
  • irish - I have seen many SNMPv3 agents for Windows, have you considered any of those? HTH, Greg
    in SolarWinds Products on Linux Comment by greg February 2010
  • mgage247 - You are using a pretty old version. We are now at version 10.4. Can you give that a try? HTH, Greg
    in Port mapper CLI issue Comment by greg December 2009
  • jlhainy - Version 5 should be fine. Can you verify with a sniffer that the NetFlow traffic from the 2600 is making it to the collector? If it isn't, the first thing I would look at would be the ACL on the firewall and the source address of the netflow data (making sure they match). If that did not reveal anything I would…
    in Netflow is not detected on the selected interface Comment by greg August 2009
  • Three answers: 1. Not yet, but it is on the list. 2. Yes, select the text to copy, click the copy link on the bottom of the terminal. Use Ctrl+v to paste. 3. This is a bug, which is on our list to fix... HTH, Greg
    in Telnet/SSH Comment by greg March 2009
  • rgiraud - You need to re-install the Windows SNMP service from the Windows CD. Sounds like it might be corrupt. HTH, Greg
    in SNMP Trap Receiver Comment by greg March 2009
  • After working with Da Haole we were able to determine the issue and come up with a hotfix. If you are experiencing this issue using the Command-line Switch Port Mapper v10.5, please contact technical support and reference this post (TT5694) HTH, Greg
    in SWSPMCMD.exe throwing a .Net exception: The number of WaitHandles must be less than or equal to 64. Comment by greg February 2010
  • Submikester, Are you doing a full inventory? Getting the Cisco Cards information from these devices should not be a problem. How would you feel about getting in touch with support on this? Thanks, Greg
    in Cisco cards data on 6500s, 7600s and so forth Comment by greg February 2006
  • Jon, We should be able to handle that situation. Can you get me a trace of the login validation? If so, send it to Josh@Solarwinds.net Thanks, Greg
    in Problem Logging onto Cisco 2600 Router Comment by greg November 2005
  • Jon, When logging into this device, do you normally type 'enable' or 'enable 15'? The way the node is setup, it will actually send 'enable 15' for the privileged access attempt. Try setting the enable level in the device properties to the string that you normally type for privileged access. If that doesn't work, give our…
    in Problem Logging onto Cisco 2600 Router Comment by greg November 2005
  • Custom menu options can be added to the right click menu on IE when browsing Orion pages... See the XML data located in "<x>:\Program Files\Solarwinds\SWToolset.MenuOptions". The format is fairly easy to understand. HTH, Greg
    in Starting SSH from browser link Comment by greg June 2005
  • techtips - I am concerned that the version of NPM is showing 9.x, it is as if NPM did not get updated. Can you please verify the file version of Network-Performance-Monitor.exe in the Toolset install folder? If the file version is correct,would you be able to do a a GotoMeeting? --Greg
    in Engineers Toolset v10.2 Network Performance Monitor refuses to shutdown Comment by greg August 2009
  • Submikester, Could you contact support @ 918-307-8100 so we can get some more information on your setup? Thanks, Greg
    in Cirrus SQL DB issue Comment by greg January 2006
Avatar