acgarcia1

Hi I have to questions from this post since Im configuring ASA5550: 1. What should the port set to be for (config)# flow-export destination inside 10.2.2.2 2055? 2055 0r 9996? 2. Also, will this matter if i chose OUTSIDE instead of INSIDE: (config)# flow-export destination inside 10.2.2.2 2055... since it mentions on the…

Hi Craig, We have 2500, 4500 and 5510s on our production. And we have done installing NCM as well as discovered those devices into the software but as I tried to back-up the configs using NCM there was an error before finishing the download, it simply could not back-up the configs. What could be the problem? Again, snmp…

Thank you for your time DH, I need NCM to monitor any changes on nortel distribution and access switches. We dont use cisco switches in the production area only cisco asa for the firewall. I hope I get a respond soon. I was hoping enabling snmp on those nortel devices would do the trick. :)

Thanks Phil for the answers. They are very helpful.

What I mean by the above post is that, do I need to enable my nortel devices to send syslog to my ncm for the ncm to notice config changes made on the switches or snmp is enough for this? Thanks

Thanks Phil, Do you have any steps or procedures that would help me accomplish the following: 1. What are the steps or procedures on how to use' the event correlation' ,like, I need to know the relationships of any number of events with some identifiable patterns - relationships between events. 2. What are the steps to…

Thanks Danielle for the response and I have gone through the Admin Guide(but maybe I missed the part) but Im a bit confused as to how would NCM be able to backup configurations as well as upload any configurations changes created on the console to the devices. Is enabling snmp on the nortel devices enough to do all these?…

Hi Phil, Thanks again for your usual assistance. I overlooked the part that the client has Iron Port in their net infra. It only came up on the later part of the POC.

Hi mcbridea, Thank you. My lab simulation worked. I just added the port 9996 as suggessted above. Great job.