RyanJett

A Knowledge Base article has been created based on the content of this thread. For more information, see http://knowledgebase.solarwinds.com/kb/questions/2034/.

A Knowledge Base entry has been created for this issue. http://support.solarwinds.com/kbase/ProblemDetail.cfm?ID=1249

A Knowledge Base article has been created based on the content of this thread. For more information, see http://knowledgebase.solarwinds.com/kb/questions/2033/.

This procedure has been added to the SolarWinds Knowledge Base.

Are you saying you would like to see the latency chart for only source to target instead of round trip time (source to target, back to source)?

In your situation, Tx indicates all traffic that is being sent out from your gigabit interface to the server it is connected to. Rx indicates all traffic that is being received from the server sent to your gigabit interface. Does this answer your question?

Paul, Yes, to view your sFlow data you will need access to your Orion Web Console. The Toolset will only be able to display NetFlow data.

We've added this to our knowledge base here http://knowledgebase.solarwinds.com/kb/questions/2053/.

We've added this to our Knowledge Base here http://knowledgebase.solarwinds.com/kb/questions/2056/.

The Rediscover process will not overwrite any bandwidth settings. It is designed this way to allow the user to change bandwidth settings (for example: an interface only using half of a T1), and have the settings saved. Otherwise, when the next Rediscovery occurs, the bandwidth settings would be set back to a full T1 in…

Currently there is no direct integration between the IP SLA Monitor free tool and the Engineer's Edition Toolset. However, it is on the roadmap to include this with the EE Toolset in a future release.

Notepage has a modem paging software package that integrates well with Orion. They have a page describing how to integrate their package with Orion and links to download a trial. http://www.notepager.com/solar-winds/orion.htm Notepager Pro is only $29.95, but I'm not sure if it supports TAP. PageGate (another Notepage…

bgraver, Is the MSDE version of SQL (the version that ships with Orion) installed and running on this server also? If so, this could be what is taking all the RAM. This Knowledge Base entry explains how to limit the amount of RAM the MSDE version of SQL can use: support.solarwinds.net/.../ProblemDetail.cfm If SQL is not…

The Alerts are stored in the SQL Database. The Alerts are still assigned to the old Polling Engine. You will need to reassign the correct EngineID to these Alerts. To do this, first stop the SolarWinds Network Performance Monitor Service, then perform the following steps: 1. Close the System Manager. 2. Open the Database…

SamuelB, Try this filter: SortGroup IS NULL If that does not work, try creating a Report in Report Writer to show the same list of Nodes. Ryan Jett SolarWinds.Net 918-307-8100

Jon, After installing the Windows Server Inventory Add-on, you should see three new .ConfigMgmtInventory files in the \SolarWinds\Configuration Management\Inventory folder: 50-Windows-Services.ConfigMgmtInventory 51-Windows-Software.ConfigMgmtInventory 52-Windows-Accounts.ConfigMgmtInventory If you do not see these files,…

Jon, We found an issue with the Cirrus maintenance accounts and have resolved it. You should now be able to see the additional components. If you cannot, you may want to refresh your browser, or maybe even clear your browser cache. If you still cannot see these downloads, email support@solarwinds.net to get this resolved.…

quote:Originally posted by trm33 When will the Windows Inventory package be available? Both Inventory add-ons are available in the Customer Area of the SolarWinds website. Once logged in, click "Additional Components" and then click "Additional Components for Cirrus" to download the Inventory packs. Ryan Jett…

A Knowledge Base article has been created based on the content of this thread. http://knowledgebase.solarwinds.com/kb/questions/2153/ How can I automate IP Address Management scans? IP Address Management has the ability to scan subnets on a scheduled basis. This ensures that your IP address information on all of your…

You're exactly right. You need to reassign the EngineID in the database so that it sees the old Nodes that are still assigned to the old EngineID. Follow the steps listed in the Reassigning Nodes to the New Polling Engine section of this document: http://www.solarwinds.net/netperfmon/help/admin/Server-Migration.htm This…

We've added this to our knowledge base here knowledgebase.solarwinds.com/.../.

I don't know if this is on the road map yet or not. I have marked this thread for a PM to take a look and answer your question.

quote:Originally posted by rs3819 Actually, It looks like I fixed it by adding a filter for Volume Percent Available "is greater than or = 0". Please confirm this was the right approach. Thanks! Yes, this is the filter that I would apply to hide the unknown values. The blank values are most likely from devices that were…

rs3819, Open the Report Writer and click the New button. Select Current Status of Nodes, Interfaces, etc. and click OK. Give the Report a Title and then click the Select Fields tab. Add the following fields; NodeName, Volume Caption (this will be listed just as "Caption" under the Volumes group), and Volume Percent…

To answer your first question, yes, you would have to configure your Cisco device with another destination address and port so that it sends the NetFlow data to your local PC (where Realtime NetFlow Analyzer in installed).

You can do this by adding Macros to Labels on the Map. Any Macro that can be used to create an Alert message (including Custom Properties) can be used in a Map. To add Bandwidth Utilization to a Network Link on a Map, right click on the Network Link and click Add Label. Edit the Label and delete any text in the Label. Type…

To move your Orion installation to a new server, follow the instructions listed here: www.solarwinds.net/.../Server-Migration.htm This provides all of the steps necessary to move the SQL Database, Alerts, Maps, Reports, and to Reassign your Nodes to the new Polling Engine. If you encounter any difficulties, contact the…

quote:Originally posted by cherrypicker Nice to have... Orion should have to ability to monitor Windows event logs? It would be nice if it can be incorporated into the alerting engine as well. Any thoughts? CP There is a free add-on utility that can be installed on Windows Servers that forwards the Event Logs via Syslog…

The Windows Event Log Forwarder is an add-on for Orion only. The Syslog messages are designed to be sent to an Orion Syslog Server. Because the Syslog messages are scrambled, point the Windows Event Log Forwarder to the Orion server and you should be able to read the messages using the Orion Syslog Viewer without any…

To unlock the Admin account, you will need to download the Account Manager application for the Customer Area of the SolarWinds website. Once logged in, go to Additional Components for Orion and download the Account Manager. Install it, then open the tool from the Windows Start Menu - SolarWinds Network Performance Monitor…