BryanBecker

Bump. I know people have to be using the inventory piece. Any luck with this? BB

We dumped Concord for Orion as well....we couldn't justify the maintenance costs when Orion did a better job at a fraction of the costs. BB

Here is what you can do : Go into the NTA tab. If you don't have this already you need to add the Traffic View Builder view to your NetFlow Traffic Analysis Summary view. You can do this via the admin page. Once you have Traffic View Builder you can build a view by dropping the list down and select 'Domain'. You can enter…

Has anyone tried the newer versions? We are running into this now and I know 5.0.9 workjs but it is a little older. Can anyone validate a later version that is working? Thanks. BB

I got it working : Node.Status = 2 AND Node.Vendor = 'Cisco' OR Node.Vendor = 'Juniper*' OR Node.Vendor = 'NetScaler' The documentation on the web site needs to be updated...it shows : Example filter to show nodes from Nortel devices that are Down:Node.Vendor Like 'Nortel%' AND Status=2 Then just below it is has : Example…

Greg...is there anyway to add another option to the daily change report. None of the existing ones are useful to me. All I want is another option to show the config changes compared to the most recent downloaded onfiguration..that's it. There is an option close to that but you have to select the date. BB

I will say I have alot of "Connectivity issues discarding config file" with every one of my NetScaler Load Balancers since I upgraded from V3.5.1. BB

It's not easy to find for sure. I've asked a few times for them to put the versions somewhere on the poller engine status page, or somewhere on the admin page. BB

12.2 is pretty old stuff...we run 12.4(13b) on both the remote end and head-end and its working great. BB

Hi, I need to create a custom view for a colleague to log in via the webconsole and see this view. He basically needs to see the CPU load, memory usage and i/f traffic on 10 specific nodes (out of about 400 that I have discovered) but have it shown all on one page. I can isolate the nodes and then he can click on each…

I've also noticed that the alerts sent via SNMP from Orion are also SNMPV2.

We get this error when installing that 2.0 on our server :

Is there any update to this? We are running SCOM 2012SP1 on a 2012 Server and the MP 1.1.1 errors on the installation. So I wanted to know if there are any updates since this was posted in October?

I work in Maryland...my primary Orion servers are in Missouri and the backup servers are in New Jersey. So the web site is 1000+ miles away and it loads pretty well for us. It all depends on your WAN service and the latency on it. We use MS Terminal Server to these boxes to add devices, etc. and the response is pretty…

quote:Originally posted by dhutchings Yes, it's exactly what I was worried about. We've got hundreds of nodes, and I was hoping there would be a friendly checkbox system like in the basic reports rather than having to create a trigger entry for each server for each advanced alert I want to create. Wow. The advanced alerts…

I have the same problem from time to time on different devices. No rhyme or reason. But when I go into the App and do a validate login it works fine. I'm stumped. BB

7.2 is now available on the website for registered users.

I downloaded the updated Advanced Node Details from the site and it works. I was wondering how I could get it to call a different program then the standard telnet.exe? We use SecureCRT on our machines and it supports command line but I don't seem to be able to get it to work. Any thoughts?

Check the user guide. Pass-thru authentication is covered : www.solarwinds.net/.../wwhelp.htm Basically in user manager you need to set up the accounts : domain\username You'll have to update IIS to use Integrated Windows authentication. BB

Haley....if you do run in multiple poller like we do....do you have a seperate service/web install? Thanks. BB

Just wanted to update everyone with the issue I had. I basically, no matter what I did, could get the right-click to work for me. I had the latest installed of the V7.6 beta and EEV8 toolsets. After several suggestions from Solarwinds we uncovered the issue. There is an IIS URL Scan tool that can potentially block things…

V7.6 should be close. If you didn't get it but I was emailed this week asking for feedback to V7.6 in regards to perceived "slowness" when running the new version. It sounds like they are waiting to hear from people before they release it. BB

I have checked under my account that says allow broswer integration. That is set to YES. I also have allow secure data on Website checked under System Manager on the server. I have placed my server in "Trusted Servers" list in IE where all ActiveX is enabled. I'm running out of ideas. [:(!] BB

Simple question....do the toolsets have to be installed on the server or on the user desktop? I have 7.6 loaded on a server and the EE toolset (V8) on my laptop and I have no right-click options. BB

I have the VBS script for the config backups. Mine seems to hang up after 30 devices or so. I checked the script but I don't see where the problem is. Is there a limit of devices to that script? NG...you talked about you use a batch file to archive the configs. If it isn't too much to ask can you shed some light on how you…

IIRC Orion can go down to 1 minute max but if you need something less than that I suggest you purchased the Solarwinds Toolsets and use it's real-time monitor, SNMP graph, etc. That will give you what you need. BB

I tool have CiscoWorks and the server is always out to lunch. We are making changes to our configs and its not recoginizing them so they are backed up. So I have the automatic script working. My question is....is there any good to to version these? Meaning the current script just overwrites the one that is there. Anyway to…

Try saying the visio as a .jpg. Copy that to the maps directory and then select it to be your background. Once saved in MapMaker it will convert it to .gif. BB

I've been a CW user for years. We currently use LMS2.5 which is the latest version of CW. They have made good strides in theis product but I do still find it pretty hard to use sometimes. We continue to have weird backup configuration problems. Sometimes it works, sometimes it doesn't. I'd really like to see Cirrus use the…

quote:Originally posted by Network_Guru We are using SSH (putty) to access our routers & switches. Has anyone found a way to launch an SSH session from IE. 6 in Win2k/XP? I've searched Google, but have not been able to find a solution. -=Cheers=- NG I'm looking for that too NG. I was able (with help from another thread in…