Cisco Fan Enumeration Map

Question

I am configuring a custom device poller for the 6509's we have in our network for fan tray status and am running into a couple of issues.  I've seen where you can use an enumeration map to give the status of the fan tray and I configured it using the OID 1.3.6.1.4.1.9.9.13.1.4.1.3.  Then I used map "1 other, 2 ok, 3 degraded, 4 failed.

When I test the node with this configuration, the switch is returning all 1's.  In some cases it is returning a 5 or a 6.  I didn't know if anyone knew the map values and what they mean.  Obviously 1 means OK, not other.  Any help would be appreciated.

Thanks,
Dave

davidbeaver1 · Answer

Awesome.  Thanks so much.

Dave

savell · Answer

The Cisco web site shows these values (http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=ciscoEnvMonFanState):

1:normal
2:warning
3:critical
4:shutdown
5:notPresent
6:notFunctioning

Dave.