The most recent content from our members.
Want one alert to trigger when ONLY multiple tunnels drop. I will be testing with AND logic tracking both interface names but really don't think it will work. Maybe possible with Interface Groups, but in my environment wouldn't be possible with size and alerting. Example Router A Tunnel 10 Tunnel 20 Tunnel 20 Alert only on…
Hello, We are attempting to create an alert that will notify us when any interface on any switch at a particular location experiences CRC errors. Attempting to use the "CRC Errors This Hour/Today" function results in no alerts on any node/interface despite us creating significant CRCs to test (well above the threshold for…
Hi Any one have the same problem ? Interface that was not in use for log time got new description and change status to down. On the alert we got the description was of the OLD interface... why alert manger still have the old description ?
This query was originally adapted from jbiggley post in For the purposes of this post and to keep it as simple as possible, I'm trying to create an alert that will identify interfaces that exceed a threshold defined as a percentage of receive discards (.1% for this example). This query works just fine in SQL studio and…
OK, I feel silly here but I can't get an alert to detect and alert on a down interface properly. I feel like it is straight forward so not sure why it's not alerting. The first snap below shows one of the interfaces and the node it is on. I am trying to alert on any node that starts of "r1" or "r2" and the interface name…
Ive tried to modify the default rule to alert when an interface goes down, to only be triggered when it belongs to a particular node... and for the life of me, I cant get it to work. Trigger condition "I want to alert on", if I select interface, it list all the interfaces on our network, and I then cant specify a node, and…
Hello, We have a lot of alerts that are interface based and some of these alerts are becoming nearly impossible to manage since they are monitoring too many interfaces. For example, we have ''Interface Down'' alerts for our distribution switches that are monitoring every UP interfaces. The problem is that there is many…
I'm curious to see if anyone else has had this problem, as I've hit a dead-end with SW tech support. I'm monitoring the outside interface of a Cisco ASA 5510, on which I've enabled the Custom Bandwidth setting, as we have a dedicated 50 up / 50 down circuit. The utilization percentage currently shows as follows: Receive…
Whenever I try to set an alert on a node for specific interface i.e WAN interface for high bandwidth utilization I'm not getting alert for that particular interface. For reference below is network topology :- 1 For example I have two routers connected to different ISPs so they do have two WAN interfaces and then they are…
It looks like you're new here. Sign in or register to get started.