The most recent content from our members.
I would like to create the alerting profile that helps me to get the data for Rx Load (Receive Load): Threshold: 206/255 80% Tx Load (Transmit Load): Threshold: 206/255 80% Input Errors: Threshold: 50 errors per 10 minutes CRC Errors: Threshold: 10 errors per 10 minutes I have added the conditions for Rx Load and Tx Load,…
As part of off boarding process we might have to disable the account as soon as the employee leaves the firm. Well I can straight away delete the account, but as per the process we do not delete it (rather we disable it) and retain the same for a month. Then we raise a change and delete all old accounts or unused accounts…
I'm trying to figure out if it's possible to automatically (on a set schedule) import interfaces into NPM if the device is already being monitored. Here's my scenario...I have just over 300 network devices being monitored, mostly Cisco switches. Ports that I'd like to be monitored have ":MON" added to the end of the port…
Hello Thwackers, I'm trying to come up with a way to add interfaces that were previously shut down (and not discovered for management). Without deleting the device, I've run network discovery, using the Automatically monitor based on my defined monitoring settings. This doesn't seem to add newly up interfaces. Ideas,…
Hardware sensors for optics frequenlty enter critical state with values that are clearaly at the end of the bounds check (100W, .0000000001, -40.00 sBm) however, shutting down the interface does not appear to mute the hardware sensor (optics) for the interface in question. i want to know if there is a way to link up the…
We have a group that has an account limitation based on a custom attribute, and all was going well until today when they cannot use Edit Properties on a Node because they receive the following error: Removing the account limitation fixes the error, but they need it. Has anything like this happened to anyone? It's the Edit…
How can we find names of transaction tables for the bandwith in/out failure reports & data being saved
This isn't a NPM Feature Request, its more to do with UX blog Can we have a Disable or Hide Module Option under Web Console settings or under Product Specific Settings as a new option 'like say Hide Module Settings or so'. 1. Now say I am running NPM,SAM,WPM,NCM,VMAN etc in my environment 2. Initial say we integrate a…
I already Setup NPM and NTA to Monitor the health & Traffic on Cisco PE Routers. But I am not getting the real Time Traffic output in Solar Wind monitoring Traffic. Below is the Netflow Configuration applied on Routers: Further the Device Polling Interval is the same as default which is 120 Second and Statistics Collection…
Hello, I would like to see peak utilization for CBQoS class map but don't see any resource available in Orion. Is there any way I can create a custom resource to get peak traffic for CBQoS. I looked into database field and couldn't find any field related to peak traffic for CBQoS. Any help is much appreciated. Thanks,…
It looks like you're new here. Sign in or register to get started.