The most recent content from our members.
Greetings: Question 1: I have to deploy 19 L2 switches and 2 L3 switch. Need help in picking the right switch. I am going to use SNMP and Sflow with Solarwinds or Auvik.com network management software to manage these switches. So it comes down to the hardware performance of the switch. I have the three switch models from…
Hi Guys (and Gals), Due to a recent change in our network we need to rename all of our cisco switches with a new naming convention. Our current convention goes like this: c12-001 c12-002 c12-003 ... c12-254 This is spread across the whole campus so new switches have more recent numbers, but can be located in ANY building.…
Hi Team, Looks like larger network devices are missing from the meraki integration These seem to be pollable along with WAPs under a single call. This this due to be added in shortly? I'd prefer to not have to spin up a custom table if I can avoid it. Kind regards,
I would like to clarify if there is any compatibility issues with the S200 to Cattools?
Hello guys, we've been trying to add a node (huawei s5735) in NPM to monitor interfaces, state etc... but it doesn't seem to be monitored by the NPM. I've tried adding the OIDs in the Universal Device Poller (from what I read on the Internet) and the UDP says these OIDs are not supported for this device. These are the ones…
We'd like to generate a SolarWinds report to show user accounts on each Cisco switch in our network, and use it to confirm which switches have individual user accounts on them and identify any ‘rogue’ accounts.
We have a switch with ports we need to monitor and that have to raise warnings/alarms. Other ports on the same switch need to be monitored, but we dont want to see warnings/alarms. We just want to see the statistics when needed. Is that possible?
Recently, I had met difficulties with my Cisco WS-C2960S-48TS-S switch. I can ping it, but I keep getting "Connection refused by remote host" when connecting to it via SSH. I don't know how to solve this problem. Is there a debug that might give me a clue as to what I could be missing?
I want to custom update the SNMP-SERVER LOCATION field on approx., 1000 switches. However the field is different on per switch(es) basis. Some offices have 1 switch, some offices have 2-4 switches. How can I do this with cattools? I am currently able to do this with 1-4 switches because those 1-4 switches are at the same…
Hi, Question: We would like to achive vlan mapping where user only have to put his/her mac address of the device and destination vlan to be mapped. We are doing vlan mapping for end user devices and want to execute some commands before we map source vlan to destination vlan with the help of mac address. and we are doing…
It looks like you're new here. Sign in or register to get started.