The most recent content from our members.
Eaton Powerware is one of the biggest UPS manufacturers, I think they are even bigger than APC if you look to the marketshare (do NOT quote me on this though). Could we please get native polling for these devices, like we get with the APC UPS:s? //M
For instance, I have two UPS devices with Node ID 4967 and 4964. Both are SMART UPS. I tried to enable for 4967 and you can see the UPS poller (PCU.Statistics.SNMP.Generic) appeared in the Pollers table. I'm looking for a way to enable this for all UPS devices we have without the need to do list resources individually. I…
I'm working on migrating our SolarWinds install from an older server to a newer server set up under better best practices. Prior to the full migration, I have to confirm full functionality of the software. Both systems are running 2023.4.2 and I've noticed something I didn't know would be considered normal as a discrepancy…
I would like to generate Alerts with the following events built into Solarwinds. Fault Condition etc. How can this be done to replicate the events?
I've got a bunch of new UPS devices that I need to monitor but Solarwinds doesn't support them yet. I know I can do the MIB submission process but I want to get something in the meantime. I'd like to get a list of the OIDs that Solarwinds uses to monitor a supported UPS device so I can setup UNDP for the new ones using…
We noticed the majority of our UPS devices were not displaying any data in the widgets, instead we were seeing 'Data Not available'. When checking the SWQL table Cortex.Orion.PowerControlUnit we seen there was recent polled data in there. Then eventually we discovered that the OrionNodeID value was NULL for each UPS device…
Good morning! I've noticed that several of our APC UPS nodes in Solarwinds are showing old data (serial numbers, software versions, etc). The UPS' in question have been replaced, it looks like Solarwinds is still showing the data from the old UPS instead of the new. I've tried rediscovering the nodes and…
Greetings, I do not have access to the NPM, to build a UnDP for our devices (a UnDP was requested by client). I see that it's basically an XML coded file. Does anyone have a breakdown of the options, and what they represent? Specifically: SNMPGetType="GetNext" NetObjectPrefix="N" PollerType="S" Unit="" TimeUnitId="0"…
Hi all, Based on follow up related to this thread: https://thwack.solarwinds.com/t5/NPM-Discussions/Solarwinds-and-Tripplite-UPS/m-p/141406 I made some UnDPs for Single Phase Tripp Lite UPSes and PDUs with "LX" network management cards (e.g. the WEBCARDLX). These may serve as a good starting point if you're looking to do…
I'm trying to configure an alert using the upsBasicStateOutputState poller with the Custom Numeric Value field so when the value is not equal to 0001010000000000001000000000000000000000000000000000000000000000, it sends out an alert. However, the text box will not accept this number and gives an error, "Value is invalid.…
It looks like you're new here. Sign in or register to get started.