The most recent content from our members.
Hi, I am struggling to find a solution to this. It seems like there is an abundant lack of support for the 4500X models when configured in a VSS. I am attempting to find the serial numbers for BOTH of the supervisor modules. SolarWinds by default only seems to list the active supervisors serial number. Does anyone have a…
I have a few Cisco Catalyst 4500-X switches configured with Virtual Switch Stacks (VSS), I noticed that the SolarWinds switch stack poller doesn't recognize it as a stacked switch. Is this by design? Is there a better way to monitor the stack members in a VSS? Does NPM currently not support monitoring stack members in…
Hi, in last month I install NCM and try to downgrade configurations from network devices. It works fine for most Cisco, HP, Brocade and Huawei devices, but I have problem with Cisco 6905 VSS switch. Login to VSS by ssh require a login and password and this step works ok. To download a config I need to go to enable level…
Hi; We deployed Cisco VSS with 4506-E, and we defined custom pollers for monitoring some variables of the VSS. But I´ll prefer to have more information about both physical switches, instead of a global view of the cluster. Is it possible to discover the VSS switches in native mode in Orion? Thanks!!
All - I've written a brief guide on how we use the Custom Properties available in NPM to enhance and simplify our alerting. The example I use in the document is: how do you alert on one part of a port channel link going down when the port channel itself stays operational? Any comments/amendments/suggestions are welcome.…
Add both serial numbers from a Cisco VSS pair to reporting. When a report is run against Cisco switches who are paried togethor with VSS only one serial number is reported. To add VSS switches to my report I must connect to these switches and do a show inventory then add the serial numbers to my report.
Hi, Has anyone had any strange memory readins via SNMP using NPM and a Cisco VSS cluster? I am seeing incorrect readings, for example i have 1gb memory and 370mb is used. But NPM says 104mb in use, 2mb free? Does anyone have fix? Thanks!
308965 We need the MIB, and possibly a way to use a command: sh idprom all clei | in back
Hi I am tasked with setting up monitoring for a VSS 1440 running on two 6509-E's. One thing we want to monitor is what states the two SUPs are in, standalone, active or standby. Basically, I can get away with alerting if the status changes, because..it should not. My issues is two fold: 1. I need to set up a custom poller…
It looks like you're new here. Sign in or register to get started.