The most recent content from our members.
Cisco ASA/FWSM. Place a button for double logins or build into the NCM device config I just wan it to login to the fwsm or asa command line without all this extra work. Currently for ASA/FWSM there is no direct login to privileged mode. Even with Tacacs or any other setup your first prompt is >. You need to do enable and…
As above, is it possible to back up three contexts in a multi context firewall whilst also including unobfuscated pre shared keys for VPN termination? Heres the template I'm using... <!--SolarWinds Network Management Tools--> <!--Copyright 2007 SolarWinds.Net All rights reserved--> <!--Modified 12/02/2011-->…
Is there a template for backing up all the contexts including admin and sys for this module? I need to back it all up many thanks
Hi all - There is probably a stupidly simple answer to this question, but I've tried everything I can think of. When looking at config comparisons between the startup and running configs of all my FWSM and ASA units, the "written by" lines below are flagged: I have tried every RegEx expression under the sun (and a few…
After many years of running Cattools 3.2.7 I installed the new version 3.5. Now I'm unable to get a successful backup from my Cisco FWSM. the Kiwi log in debug mode shows that the job was successful. However the Current Config File has the following: more system:running-config %Error parsing system:running-config (Bad file…
WE have several 6509/13's as our core switches with FWSM's in them. Most of our VLANs are defined on the FWSMs. I have configured netflow on the MSFC for VLANs not behind the fwsm, but cannot seem to configure it on VLANs defined on the FWSMs. Are there different commands and procedures for configuring netflow on a FWSM?
Whenever I make a change on a Cisco FWSM, Cirrus detects the change, but also says that a bunch of blank lines were added and removed. Is there a way to tell Cirrus to ignore blank lines in the Comparison Criteria? See attached image for an example.
It looks like you're new here. Sign in or register to get started.