The most recent content from our members.
I have a critical interface, which is administratively up, and operationally down (normal state for span port monitoring). I need to create an alert to trap if the output rate (bits/sec) drops below a certain threshold. Here is sample of the interface to demonstrate that despite line protocol (operationally) down -…
Hello... We have discovered we have a number of interfaces on a number of our nodes being monitored by Orion NPM (V10.0 SP1) that are not providing correct utilization information. It turns out that the issue is that the nodes are being polled for 32-bit counters rather than 64-bit counters. There are a number of Thwack…
Has anyone else been able to monitor any sub-interfaces on Juniper Netscreen products? I've setup a UDP but that doesn't offer the results we're looking for, not to mention the fact that I have 450 of these to monitor. I'm curious whether I'm the only one having this problem, or if this is known limitation with the product.
I am new to these forums so I am not sure if this is the correct place to post these questions so please forgive me. We are seeing Transmit Discards in excess of 100,000 on one of our Cat3560 (12.2(44)SE5 and a Cisco LAP1141. When drilling down into the two two interface, we are not seeing where these discards are coming…
I am looking to get some help with creating an advanced alert that will correlate interface errors with ignored packets. Right now I am getting way to many alerts that tell me that my interface is receiving errors on a regular basis. Unfortunately, those errors are due to traffic bursts on the interface. I would like to…
I need to know how this bps comes about. What we see is that on the Cisco switch the interace 5 minute input rate and the 5 minute output rate is different then what is showing up in Orion. When I talk about different I do not mean a few bps different but more like 50% or more less. So what MIB is used to get this…
Can anybody give me a detailed explanation of how counter wraps/rollovers are handled in Orion NPM? For example, if I had an interface on a router where I was watching packets per second and between polls the counter hit it's max and rolled over, how would the next period be calculated by Orion? Thanks in advance for any…
It looks like you're new here. Sign in or register to get started.