The most recent content from our members.
In my environment (an ISP-like environmnet) we have several ASR9000 series devices. Some of them are pulling hardware information (details of all cards, SFPs, etc.) while others only pull memory, CPU and the simple basics. They are all utilizing the standard SolarWinds pollers. I'm looking for what is different between the…
I'm trying to get hold of these two NCM Templates; Cisco ASR 920 Cisco ASR 903 Does anybody have one that they could possibly share with me? I've tried using the standard templates but that doesn't seem to work, the only other way of doing it is to create one myself, however I don't know how to identify the SystemOID?
I'm attempting to setup configuration backups for our ASR's but unfortunately it doesn't seem to be working. It attempts to do what looks like a special character when performing the show run then exits "successfully" but all I get for my back up is "invalid command" on line 1. Anyone have a similar issue in which they…
Hello, I have a problem with configuration netflow form Cisco ASR 9006 to SolarWinds collector. A9K-RSP440-TR V 6.0.2[Default], Built on Sun Jul 10 14:12:06 CET 2016 config : flow exporter-map SW-NETFLOW version ipfix options interface-table options vrf-table options sampler-table ! transport udp 2055 source…
We just installed a Cisco ASR 1002, The old net flow commands used in our 3845 do not work. Has anyone set configuration to export Top-Talkers? Thanks
Hi, I am trying to get Netflow working on our asr 1001 router. We used to use the normal netflow configuration, however, the asr only supports flexible netflow. I've used the below configuration. However, the interface names are not displayed ? I verified the snmp access (v3) and it works. What could be the problem ?…
Memory poller for devices which support CISCO-ENHANCED-MEMPOOL-MIB (various Cisco devices). Poller utilizes GetSubtree request to gather used memory using OID: cempMemPoolHCUsed = 1.3.6.1.4.1.9.9.221.1.1.1.1.18 Poller utilizes GetSubtree request to gather free memory using OID: cempMemPoolHCFree =…
I know this has been brought up, but wondering what the latest thoughts are on this from SW development. Most of your global enterprise customers who deploy Cisco, have or are migrating to the ASR families for their MPLS and internet edge; so, wondering what your plan is to follow and support this path.
flow exporter-map netflow03 version v9 transport udp 2058 destination IP_ADDRESS_HERE flow monitor-map netflow03 record ipv4 peer-as exporter netflow03 sampler-map nfm random 1 out-of 512 interface GigabitEthernet0/1/0/1 mtu 9216 load-interval 30 flow ipv4 monitor netflow03 sampler nfm ingress flow ipv4 monitor netflow03…
! flow exporter-map netflow01 version v9 ! transport udp 2058 destination ###.###.###.### ! flow monitor-map netflow01 record ipv4 peer-as exporter netflow01 ! sampler-map nfm random 1 out-of 512 ! ! interface GigabitEthernet0/0/0/18 description xxxxxxxxxxxxxxxxx mtu 9216 load-interval 30 flow ipv4 monitor netflow01…
It looks like you're new here. Sign in or register to get started.