The most recent content from our members.
Network Performance Monitor 2025.2.0 - We have been polling recently added Palo Alto devices for just over a year now. There is a read-only account setup in the devices and the nodes in Solarwinds are set for "Poll for Palo Alto" check box is selected, configured with the read-only account credentials. Recently, when we…
Hello All, I am facing an issue with NTA charts, while going through top conversations during troubleshooting if I am selecting duration for more than 3 days, charts take a long time to load. Sometimes it gives timeout error as well. I identified two Palo Alto firewalls which are sending huge FPS to NTA collectors.…
I have a custom poller grabbing an array from the OID 1.3.6.1.2.1.25.3.3.1.2. On the dashboard for a Palo Alto 7080, the "Universal Device Poller Status" widgit shows my poller as CPULoad, and it shows to have fetched 12 value(s). If I click on the link under the test "12 value(s)" I see a nice chart, complete with the…
I am trying to get some command output from PaloAlto firewall. But unfortunately commands are landing to device in a wrong way. Like if i am using "show system info" it is going one by one word but if i do only "show" it is executing properly. I am using the script below script = "run show system info"transferdata =…
Hello Thwackers, We were recently able to upgrade our SolarWinds Orion services and all of the modules connect to it to a verson which supports Palo Alto S2S VPN API pulling. While starting to implementing it I've noticed that the OoB alert for S2S VPN monitoring picks up every Encryption domain, which is great. The…
How to monitor Paloalto EDL host using NPM ?.
I want to use NCM 2020.02 to login and backup my PA firewall Pan OS 9.1 hardware PA-3250 and have another in Azure. I "inherited" this, so I am trying to use a PA connection profile. my backup account has superuser ability. the interface allows ssh, snmp and https. Yet, I can't get a login. i can't see to find any doc out…
Hello fellow thwackers. I have an interesting question about Global Protect Monitoring on SolarWinds. So, Global Protect is the VPN solution offered by Palo. We monitor the Global Protect users in SolarWinds NPM, but with the latest version of Palo it is very hard to tell what a user is not matching with they fail the HIP…
Does NPM, leveraging the Palo Alto API, have the capability to monitoring things such as PSU and fan status, as well as BGP neighbor status? These status are all part of the Palo Alto API, I'm curious if NPM is able to leverage that API at the moment to view these. We have API and SSH polling enabled on our Palo Alto…
I am trying to use NCM as a secondary backup for Palo Alto devices. Currently I have the device set to log in via ssh2 and transfer config using SCP. The test completes fine but when the NCM job runs, I am getting an error, (Error Downloading Config to SCP Host:). Any one else seeing this or having success backing up…
It looks like you're new here. Sign in or register to get started.