The most recent content from our members.
Hello All, I am trying to understand why Sloarwinds SNMP v2 was able to poll around 400K OID's but SNMP v3 was doing 4k. From the first look of the configuration I see few snmp-server view BLOCK XXXXXX, not if this is the one blocking OID's. Please help me what needs to be check on a cisco router and will SNMP v2 and SNMP…
I need help on configuring the alerts on when the values change below. I just cant seem to get it.MIBS are working correctly just cant get the alert part working correctly. These are the mibs I am using i just need to know when the values change and send me a alert. 1.3.6.1.4.1.9.5.1.3.1.1.10 1.3.6.1.4.1.9.5.1.3.1.1.12…
I have been tasked with configuring enhanced alerting from our global network devices. We have a solarwinds NPM/ORION solution up and running. However, there are servers/firewalls amongst the cisco routers and switches. My job is to have the cisco routers report routing information (we run eigrp - so any data related to…
My network consists of a core Cisco 3745 router behind a PIX 515 that connects to remote PIX 506s. I have the following snmp-server configuration commands on the core PIX 515: snmp-server host inside x.x.x.x traps snmp-server enable traps I have configured snmp on my switches at the remote sites and can discover and…
I've configured an alert rule on Trap Viewer to forward all traps with a certain community string to another server on UDP port 162. On this server i could see the traps arriving with destination port 161 instead 162. I'm using Trap Viewer version 8.5.1. Does someone know why the message are not sent to port 162 as…
Dear All, i would like to send traps of link up and down from a cisco router and want orion to catch it and perform a specific action, i know this is a very common requirement and many might have implement it so kindly guide me in this I will highly appreciate your response.
It looks like you're new here. Sign in or register to get started.