The most recent content from our members.
We have a large number of HP Procurve switches and for most of them NCM will not show the firmware version despite it showing up in the Description. This obviously is a major problem. Any idea what might be going wrong and how we could fix it?
Hi, I've got to roll out half-a-dozen new VLANs to 70-odd procurve switches, which is scripting nicely, but I need to tag the trunk ports on the switches, which could be 1, or it could be 20. Is there any way of using a wildcard to do the equivalent of: vlan 999 tagged trk*
The HP 2920 series switches are sFlow capable, but due to a firmware issue do not support sFlow while the OOBM (Out-of-Band-Management) port is enabled. It wasn't until a few hours on the phone with HP, them having to test it in their lab, and then calling me the next day that this was discovered. The configuration…
Is there a way to backup the little HP ProCurve 1810G - 8 GE with NCM? You can backup to TFTP so, maybe NCM can use some script or such to connect and use this ability. Normaly you can only manage it with the webinterface... Thanks in advance
Dear All, I would appreciate some help. I am trying to create a report that basicly lists all port security (MAC address violation) that have been triggered on a procurve switch. The OID displayed in HP procurve manager when such an alert is triggered is 1.3.6.1.4.1.11.2.14.12.4.0.1 The problem is that for some odd reason…
I recently configured a set of HP Procurves to log to our LEM using Syslog. It actually went quite well. Once I redirected them to the LEM it noticed them in the node management and I was able to get them to log and setup rules etc. They were sending to Syslog with the default facility of user. When I looked in the User…
Hello, In my network I have the below HP ProCurve Switches * 5308xl * 4104GL * 2650 * 2524 * 2910 al-48G I can monitor all the interfaces and environment features of all these switches but not able to montitor CPU and Memory, also IOS of each switch. Some of the devices are not even showing VLAN IDs of respective ports.…
Hi my friends, I am running Cattools version 3.6.0, now I am trying to backup the running configuration a HP Procurve 2530 switch. I have tried to enter some combinations of values under the "Passwords" and "Prompts" tab, but always prompted error messages. Can someone show me what value should I set under "Passwords" and…
Hi, I'm trying to monitor the date/time stamps on our HP ProCurve switches, but I just can't find OIDs for it. If they even exist for ProCurve switches.. I was able to do this for our Dell PowerConnect switches, but for ProCurves? Any idea is appreciated! Kay Difficulties are inevitable, but suffering is optional.
Good Morning I am evaluating Network Performance Monitor and NetFlow Traffic Analyzer I am having a bugger of a time setting up the NetFlow Traffic Analyzer with one of my HP switches. Has anyone configured this before and possibly give me some direction. I've called HP Procurve and they weren't really that helpful. They…
It looks like you're new here. Sign in or register to get started.