The most recent content from our members.
Hi, I'm wondering if someone can help since i am trying to create and monitor a UDP Jitter IP SLA so that i can monitor Packet loss. The SLA is simple however SolarWinds does not seem to display any stats for the operation. I can see that the IP SLA operation is successful on the Nexus 7k too. I don't have any issues with…
UDT displays information about devices connected to switches and routers on specific ports. Based on the bridge tables, ARP, CDP, and possibly other data, we collect information about what MAC addresses and IP addresses are on each port, and whether they are connected directly or not. Some customers have issues with making…
I'm running NPM 11.5 and I can not figure out how to monitor any Vlan information. I'm really trying to be able to monitor the Bandwidth on my Vlans. We are using the Cisco Nexus 7009 for all Vlans, Routing. I have contacted Cisco and they are no help. I think it has something to do with the MIB/OID but again no help from…
I recently added netflow to our nexus 7k and getting these messages. I know they refer to our vlans on the nexus and I am currently monitoring those vlans. I have seen reports about using the snmp-server ifindex persist command but when I try to issue the command the nexus doesn't like it. looking at the command options…
We are monitoring two Nexus 7k's with NPM. It seems as though, very randomly, interfaces will go from being Up, to Warning, to Unknown, and then Up again a bit later. Sometimes it works to use Poll Now and they will all come back Up. This happens on both physical as well as port channel interfaces. Sometimes it is a few…
I've got a problem with Nexus FEX ports throwing bogus Tx/Rx utilization amounts. I don't have this problem with ports native to the Nexus cores, only on the FEX ports. I've verified that port speed is detected correctly and that the devices/interfaces have 64-bit counters enabled. There are no similarities of devices…
Hello, I'm desperatly trying to backup the configs of our Nexus (7000 and 5000) with the free version and it fails though I filled all required fields. Is there anything to configure on the switch side (feature enabling) ?
It looks like you're new here. Sign in or register to get started.