I need to create an alert and/or dashboard widget. I did an SNMP walk on the device and have identified the specific OID's that I want to alert on and/or show a widget when these specific OID's are present.

bpacheco2712

When these devices are sending out Multicast traffic these lines are present

.1.3.6.1.2.1.7.5.1.1.224.0.2.10.50005 = IPADDRESS: 224.0.2.10
.1.3.6.1.2.1.7.5.1.1.224.0.2.10.51591 = IPADDRESS: 224.0.2.10
.1.3.6.1.2.1.7.5.1.1.224.0.2.60.50000 = IPADDRESS: 224.0.2.60
.1.3.6.1.2.1.7.5.1.1.224.0.2.60.50001 = IPADDRESS: 224.0.2.60
.1.3.6.1.2.1.7.5.1.1.224.0.2.60.50002 = IPADDRESS: 224.0.2.60
.1.3.6.1.2.1.7.5.1.1.224.0.2.60.50007 = IPADDRESS: 224.0.2.60
.1.3.6.1.2.1.7.5.1.1.224.0.2.60.50008 = IPADDRESS: 224.0.2.60
.1.3.6.1.2.1.7.5.1.1.224.0.2.110.50000 = IPADDRESS: 224.0.2.110

when it is no longer sending Multicast traffic these lines are not present. Any help would be greatly appreciated.
Thank you.

stuartd

Do the OIDs appear in syslog traffic?

If so, I'd suggest a rule and alert built through OLA. Try this for starters if you haven't done that before: https://documentation.solarwinds.com/en/success_center/la/content/lm/lm-alerting.htm