A report in the similar format as you can see in Manage subnet and IP page and lists, IP, Status, IPAM collected MAC info, UDT collected MAC info and connected UDT port. By default, there is a filter to only look for IPs in 10.199.x.x range that are monitored in IPAM.
I've been asked if I can provide a report of the LifetimePageCount for each of our 400+ printers. I can see the field and data in the Universal Device Poller Status for each node, but can't seem to find a way to build a report on that. Has anyone done this, or can give me some guidance?
Hi, I need to configure a report that gets me the summary details [in the last summary page] of all the 'Alerts configured in solarwinds' Since i require the details of trigger conditions and trigger actions configured in each alert. Kindly help me in this regard. Thanks, Arun.
A listing of all ports in UDT and what is connected to each If you wish to isolate to a particular node, add a where clause at the end WHERE UP.Node.Caption='<name_of_the_device>'
I created a report to show all elements polled at non default polling intervals. This report will return any Node, Interface, or Volume that is not polled for either up/down, statistics, or rediscovery at the pre-defined SolarWinds defaults. Up/Down, Statistics, Rediscovery Nodes 120sec 10 min 30 min Interfaces 120sec 9…
Hi All, I'm looking to create a custom report with the following criteria > Number of switches per site Number of access switch ports per site Number of free access switch ports per site (admin down) Names of switches with less than 5 ports available there's no standard report that will allow me to do this and creating a…
Hello I was hoping that someone could tell me if it's possible to trigger a report by email. Example: Last weekend we had power issues and a bunch of UPS's and switches when down and then up, and down again and so on. After it all quiet down I would like to know what, if any, is still down. Would it be possible to set…
Would like to be able to run a report and have it emailed out to a group consisting of inactive wireless devices...This report would need to have the following information: IPAddress MacAddress Last Logon (dated) LastSeen (days) (equal to or greater than 5 days) UserName any help would be greatly appreciated. thanks
A colleague has created a Universal Device Poller to extract all serial numbers from a node (system, PSU, chassis, etc) and then display the output on to a specific tab in the node view. This is very crude as the output lists all hardware inventory (all ports, fans, etc) as well asthe required bits and makes the output…
Hey All, I have just been asked again to provide a formal document for Monitoring requests so here it is. Please use your own custom fields and just add the modules you require into this doc. You may wish to add Date / Time / Name too. It is a start. Adam acmtix
It looks like you're new here. Sign in or register to get started.