cancel
Showing results for 
Search instead for 
Did you mean: 
Create Post
Level 9

MIBs and OIDs for HP servers

Jump to solution

Hey guys, just wondering which MIBs/OIDs are used to monitor HP server hardware. I want to set up traps for specific hardware failure (RAM and disk array in particular).

Thanks in advance.

Grant

0 Kudos
1 Solution
Level 13

Hi Grant,

I'm not sure about SNMP Traps, but normally the following OIDs are used with the Custom SNMP Monitor to monitor various items:

For Compaq/HP Servers:

  • 1.3.6.1.4.1.232.6.1.3.0 - System status
  • 1.3.6.1.4.1.232.3.2.2.1.10.6 - Raid status
  • 1.3.6.1.4.1.232.3.2.2.2.1.5 - RAID accelerator status
  • 1.3.6.1.4.1.232.3.2.5.1.1.37 - Drive condition
  • 1.3.6.1.4.1.232.6.2.6.7.1.6 - Fan speed
  • 1.3.6.1.4.1.232.6.2.6.4 - Fan status
  • 1.3.6.1.4.1.232.6.2.14.4 - Memory status
  • 1.3.6.1.4.1.232.6.2.9.3.1.4 - PSU status.
  • 1.3.6.1.4.1.232.6.2.6.1 - Overall thermal status

For Dell System:

  • 1.3.6.1.4.1.674.10892.1.200.10.1.4.1 - SystemStateChassisStatus
  • 1.3.6.1.4.1.674.10893.1.20.110.13.0 - AgentGlobalSystemStatus
  • 1.3.6.1.4.1.674.10893.1.1.130.4.1.4 - Disk State
  • 1.3.6.1.4.1.674.10893.1.20.130.4.1.4 - ArrayDiskState
  • 1.3.6.1.4.1.674.10893.1.1.130.1.1.5 - Controller State
  • 1.3.6.1.4.1.674.10893.1.1.2 - Array Manager Global Status

Hope this helps.

Chris Foley

View solution in original post

0 Kudos
3 Replies
Level 13

Hi Grant,

I'm not sure about SNMP Traps, but normally the following OIDs are used with the Custom SNMP Monitor to monitor various items:

For Compaq/HP Servers:

  • 1.3.6.1.4.1.232.6.1.3.0 - System status
  • 1.3.6.1.4.1.232.3.2.2.1.10.6 - Raid status
  • 1.3.6.1.4.1.232.3.2.2.2.1.5 - RAID accelerator status
  • 1.3.6.1.4.1.232.3.2.5.1.1.37 - Drive condition
  • 1.3.6.1.4.1.232.6.2.6.7.1.6 - Fan speed
  • 1.3.6.1.4.1.232.6.2.6.4 - Fan status
  • 1.3.6.1.4.1.232.6.2.14.4 - Memory status
  • 1.3.6.1.4.1.232.6.2.9.3.1.4 - PSU status.
  • 1.3.6.1.4.1.232.6.2.6.1 - Overall thermal status

For Dell System:

  • 1.3.6.1.4.1.674.10892.1.200.10.1.4.1 - SystemStateChassisStatus
  • 1.3.6.1.4.1.674.10893.1.20.110.13.0 - AgentGlobalSystemStatus
  • 1.3.6.1.4.1.674.10893.1.1.130.4.1.4 - Disk State
  • 1.3.6.1.4.1.674.10893.1.20.130.4.1.4 - ArrayDiskState
  • 1.3.6.1.4.1.674.10893.1.1.130.1.1.5 - Controller State
  • 1.3.6.1.4.1.674.10893.1.1.2 - Array Manager Global Status

Hope this helps.

Chris Foley

View solution in original post

0 Kudos

Thanks, I'll try those out!

0 Kudos
Level 9

*bump*

0 Kudos