Nexus 7k - Multi VRF Help needed

Question

I have a Nexus 7000 with multiple VRFs configured.  I am using SNMPv3 to monitor/poll the switch.  What I need is a way to be able to see all UDT and IP information for all the VRFs.

For example, I have 2 vlans, int vlan 916 and int vlan 932 that are in separate vrfs.  I also have mgmt0 in the management vrf.

Under port details I do not have any information on the IP address on these interfaces. Also in the "all IP addresses on xyz" I want to see them...

How do I go about doing this?

I am new to solarwinds, so may need a little more hand holding than most if it is not something simple

attachments.zip

analogfire · Answer

Has anyone figured out a work around for this? It appears, perhaps, the Nexus may use different OIDs for vrf routing tables than IOS / XR devices? The issue has become really apparent with Netpath, the nexus do not show up in the trace because IP info is missing.

kennethcox · Answer

We have the same issue with our 7000. Solarwinds has requested a renewal of the software of Cisco for the 7000.

Lets keep waiting.

zennifer · Answer

So .. you issue is not SolarWinds .. it is the Nexus 7000!!!   I recently replaced my 7000 w/ Brocade!!! Oops!!!  I thought I could copy you the information that I had saved ... turns out .. it was pretty useless!!!

snmp-server community 1 $t8l-iUqgoU ro

snmp-server community 1 $t8l-iUqgoU+ rw

snmp-server contact Jennifer Aguilar 915-xxx-xxxx

snmp-server enable traps holddown-time 180

snmp-server location 200 N. Kansas El Paso, TX 79901

snmp-server trap-source loopback 1

snmp-server host 10.85.1.7 version v2c 1 ***********

However... I did find a great Cisco article:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_9snmp.html - hopefully this will help!