trm33

We have 2 Nexus 5020 and are not seeing much information

I have the same problem with our 6506 switch. Sometimes all of the interfaces will go to the unknown state and a day later will return to normal. Thanks Tim

Will this only be for Cisco VOIP? We use Avaya and would be interested in monitoring VOIP traffic. Thanks Tim

I have it set to raw and enumeration already. I have several others that are working fine (line voltage, load, battery status, run time remaining and capacity) it is just the output status that is not displaying data Thanks Tim

If I remember correctly 08 Orlando 09 San Francisco 10 Las Vegas Tim

Any update on this?

Any update on this? Thanks 

Thanks for the quick response Tim

I have the same issue. The only addon I have is the Application monitor. Thanks Tim

+1

We are also using G450s and S8800 servers thanks

we use this product http://www.chatsworth.com/Common/PageTemplates/PageMain.aspx?id=40264 Tim

any word on why we are seeing this NODEINTERFACERECEIVE ERRORSRECEIVE DISCARDSTRANSMIT ERRORSTRANSMIT DISCARDS chi-isg2000-01 ethernet1/2 · 0 errors 2,885,681,000 discards 0 errors 0 discards rst-isg2000-01 ethernet1/2 · 0 errors 2,885,681,000 discards 0 errors 0 discards 

Thanks putting the .0 at the end and using "USE SNMP Get Request" worked Thanks Again Tim

I'm using this OID 1.3.6.1.4.1.318.1.1.1.4.1.1 The enumeration shows 12 values. When I run the test on the OID it displays the raw value of 2 which should be online but when I look on the web page it shows "no data"

Multicast

I’ve received over 100 emails after rebooting the server. I now shut the alerts off before I reboot. I also have seen were I receive no alerts for a while and when I test the alerts with the test email button I receive all the emails it had not sent for the last few weeks

Thanks John This is what I was looking for. We are just implementing a MPLS network and this will allows us to monitor the bandwidth at each site at the same time. Tim

More tie into Avaya you have Call Manager for Cisco, can you add Avaya S8800 Comm Manager integration Thanks

This is from Solarwinds on how to change the mouse roll over This can be done, however all the macros have not been tested with it. Please log in to your website as Admin. Click the Admin button at the top. Then add the following to the URL in the address bar. MapToolTipTemplates.asp This will give you the ability to add…

Please see the following Topic www4.solarwinds.net/.../topic.asp

On the installed software inventory the version of an installed software package is being shown as 1.2 when it should be 1.20.2.2 is there a way to have Cirrus show the full version? Thanks Tim

When will the Windows Inventory package be available?

I’m also interested in finding out how to add the extra tab to the menu bar Thanks Tim tim.mcnamara@tradingtechnologies.com

Yes we see the same thing on our ISG2000

I would also be interested in the code. You can email me at Tim.mcnamara@tradingtechnologies.com Thanks Tim

Thanks NG This will help a lot Tim

quote:Originally posted by Network_Guru Here's a couple of screen shots of the Web interface I use to edit Custom Properties for each node: This is the Node Details page with a link to the "editing page" as well as a place to add commments. This is the actual node editing page which I modified so that users cannot change…

We do not have 64bit counter set for any of our equipment

I just talked to sales and they said v8 will not be out until 3rd quarter.