ozlecz

is this a global configuration..is it a tedious job? any step by step instruction to do this please? many thanks

yes but going back to npm from apm will take a single click and a minute to come up..people who are using APM monitors servers and prefer to be at apm screen for all the time..and at the same time wanted to see everything like disk usage,virt mem, physical mem, cpu usage. or if we could see apm details by just cliking the…

i check portal just now but i couldnt see sp1 under the eoc yet...

thanks for the info denny...will let u know update for this problem

already installed and tested today..i could only see a 5secs difference in opening my 4 maps.. havent tested my 8 maps yet

okay thanks..but where is the disk usage?

they have said that in one of my posts recently and as we dont know when will they release the sp1, iam trying to do some workaround.

ive seen one on the netflow 3.0 docu itself.. interface GigabitEthernet0/1 ip address 10.3.1.2 255.255.255.252 ip route-cache flow ! ip flow-export source GigabitEthernet0/1 ip flow-export version 5 ip flow-export destination 1.2.0.12 2055 on this config, if we want to enable netflow on a second interface ie gigabit0/2,…

yes but theyre all discussing about 6509

incase i want to maximize the view

yes i saw that it is set to 30 min . so this means that -if 1000 counts of error/discards has occured within 30 min, then it will generate an warning and if it goes up to 2500 it will generate an error. is it right? what is the ideal figures for this? please advise thanks

hello, can we do this in groups or globaly? thanks

yann idont see where is the ff. --The FreeSpace property in that class is probably what you need to check

Hi Denny, Thanks for the good news but how soon would this be?

hello, i tried using wmi and selected as sample the Rtvscan.exe i dont see the virutal memory things. i could only see CPU Load & Memory Statistics i was expecting to see disk usage as well.. anything wrong..pls advise

- map1-consist of say 10 devices ( so in the eoc homepage you see all 10 objects) - map x - a nested map that consist of map1 ( so in the eoc homepage you see only map1, single obect), still need to dig into this map to see all the 10 devices. map1=10devices (single level map) or mapx=nested map1=10devices (two level map)…

not in the office now. but could elaborate more -first level objects are all netsed map -clik one of the object and will pop up the nested map which i configured on the map maker to show up as 80% -now put ur mouse pointer to any of the objects. normally the pointer will turn into something which indicates that the object…

thanks denny...just making sure the installation went right..coz still it did not resolve my refresh time issue...

hello, i could see only default groups like windows, cisco and the likes.. i want to apply them according to the property caledd MACHINE TYPE created

- i mean the distance between the objects..like if you do an auto arrange on the drawing with hierarchical. - you can see that the distance is fixed. can we manipulate this? say i wanted to make the distances closer because i find the distance very long. in short i want to modify the default distance. thanks alot.

thanks but if we can have the router config will be mos appreciated...

i have 8 maps on a single screen as an overview of the whole nationwide network. so the screen is divided into 8 small maps. what i want is something that i should be able to scale a map to a full screen.

i mean in the mapmaker we have a lot of objects/devices. now if we do auto arrange, and select hirarchical, then mapmaker will arrange the objects for you. the thing is what if you dont want the distance between objects and you want them a bit closer. how will we do that? thanks

i have 80% warning and 90 for high level

ive attached

hi yann, edit could only be seen on the first level map.. thanks

so what are those figures error level - 2500 will apprear on "high errors and discards" report warning - 1000 will appear on "high errors and discards" report are the figure an accumulated errors in 1 minute or 1 hr..its like if i have accumulated errors of 1000 in 1month, will the error gets triggered? thanks

-tabs were there, just not shown when pasted.. -i doubt maybe the subnet parameter on the procedure is not clear to me..when on the network tab, there is an ADD SUBNETS, and DISCOVER SUBNETS THRU SEED ROUTERS...i CLICK ADD SUBNETS and put the subnet mask of the network iam trying to discover...

which one is beeing colored in here?.. i dont see any npm parameter saying when node is down then color the object as red etc. but thats what is happening..

its 1.1....customer says its unaacceptable