glsmith67

We do not have NCM installed, will all of this still work with only having NPM 12.2?

This works well but what if it is flapping in between the Routing Neighbor poll, ours is set to 5 minutes, so each poll it's still established and the change is not detected but the flapping routes is increasing. Is there a way to setup an alert if a route flaps more than X amount of times? We recently had an instance that…

Were you able to find a way to monitor hardware health of this Cisco rack server. I have a client requesting this as well for the same server.

Yes I was able to get this working. You need to setup monitoring of the CIMC address not the server's address, you can set this up through the CIMC web interface. Configure for full SNMP read access. Once setup and polling the device, import this custom poller template - C-Series Hardware health.UnDP - and assign it to the…

I am looking to setup monitoring of the power supplies, will be setting up alerting if one of the power supplies fails or is unplugged. I see that I can setup this monitoring through OID's using the universal device poller, just don't have much experience with it and trying to find the right OID .

Thank you! I was able to get SNMP setup on the iL0 and all of the array and battery info is now polling.

Hello pratikmehta003, Thank you for the response, just to sure does this have to be done from the iL0 IP and not the server OS IP address? We have the SolarWinds agent on this server and get all the hardware health with the exception of the array, wasn't sure if there was any configuration in Insight Manager that needs…

Ok I got it working again but that is odd why it stopped. What I changed is I removed the Where conditions on the variable for growing over 10% and being larger than 50% full as at this point it's already triggered on this Volume ID. We don't need to filter that again and just need the details for that specific Volume ID.…

Were you ever able to get this working? I'm running into the same issue and not all of the widgets that are in Virtualization Manager are available as Orion Resources. I am trying to use the Capacity planner that we have added to a dashboard view and it makes it much easier to see it on a standard Orion page than have to…

At the top where you can change what you want to alert on you'll need to change to custom sql alert like below.

WHAT'D YOU DO!? I'm looking into it now but I had this alert running since I last posted and even an email with working variables triggered last night . . ... .but checked it this morning after I saw your comment and it's doing the same thing for me now. hmmm

Hey I'm just curious from monitoring the Hardware Health on the iLO are you able to see the battery status on the Smart Array? I see Array in your screenshot and I'm not getting that using WMI on the server itself.

Just updating the email variables I had mislabeled the Percent Available yesterday SQL and it was giving percent used not available also rounded the percentages. The Volume below has grown by 10% since yesterday. Node Name: ${N=SwisEntity;M=Node.Caption} Volume Name: ${N=SwisEntity;M=Caption} Volume Size:…

I just had the same issue and moving the node between pollers worked for me as well. Though this is at least the 3rd time this year my pollers have had the same issue. Typically it's just NPM that falls behind with polling times in the past. I've gone through the process of reinstalling the job engines and data collector…

Has anybody solved this? I know you can add custom fields which I have one for Owner. But cannot find the table I need to specify to filter it by. For example Subnet.Owner like '%example%' does not work.

When using multiple polling engines and Agents, if a poller goes offline, Is there anyway to change which polling engine the agent is communicating with? My thought is probably not for Agent Initiated communication but not sure for Orion initiated if it will accept communication from any of the pollers on port 17790.

That is perfect it worked for me! Thank you very much lag. I have tested and it works for us. Below is how I have the email alerts setup if anybody else would like to use, it includes percentage available currently as well as the calculated max percentage from the SQL alert query. The Volume below has grown by 10% since…

Do you know has this been resolved? I'm seeing the same issue it does open a new incident for server A and server B. But if server A triggers an alert again it reopens its same old incident again. All the Reopen state appears to do for me is when an alert resets it sets the Incident to 'Resolved'. If that same object re…

Hey eleven years later and this thread is still showing me what I needed!

Can you speak of what impact you will see on the polling server? Is there any resource that should be increased (memory, cpu's, etc...) on the Orion server when changing a large number of nodes from SNMP to WMI? In our environment we currently have about 500 Windows servers and are looking to get away from SNMP and change…

We were able to do this with our Cisco Routers using a custom poller and OID: 1.3.6.1.2.1.15.3.1.2 It will return the data in a numeric format of 1-6. I have alerts setup on Custom Table Poller status, that if BGP is not equal to 6 for greater than X minutes it will send an alert. 1 = Idle 2 = Connect 3 = Active 4 =…

Sorry old thread I'm replying to, but in the table Accounts on the database there is a column for Group Priority, if one group is set to a higher priority than the other and a member is part of both groups do they then get permissions based on which group their account is associated with that has a higher priority?

Did you speak with support about this resource? I've been curious how often the Forecast updates if it's daily or if a drive suddenly begins filling up rapidly if the forecast updates simultaneously.

Hello, I read this as well about the maximum number of agents is 1000 per poller. Is this still the case? If the agent is less of a use of resources what is the reason a poller can handle more WMI monitored nodes than Agent monitored nodes?

Have you contacted support? We had the same issue in late December with our environment I contacted support and they collected logs and gave me instructions on how to correct it. (Looking for the email or would post their notes). If you look at the Next Scheduled Poll for that node, is it in the past?

Does it only update the Volume Forecast daily? Or if during the current day a Volume begins filling up rapidly is that calculated into the Forecast.

I'm having this same issue, I tried deleting and adding back. The node stayed up for the first minute or so then went down. It's very odd because it's using the Status and Response time agent for status polling. Agent connection and plugins are all green and up to date. I can even list resources and see all the drives and…

Hello Trilobite Rex, My guess on that would be if you are monitoring Physical Memory as a Volume. I always make sure to uncheck Physical and Virtual Memory as a volume and only monitor CPU & Memory. I find it gives too many false positives as memory usage fluctuates it's easier to alert off disk drives only not memory for…

Thank you lag, do you have any suggestions on how to write this into an Alert? Whats throwing me off with my minimal SQL knowledge is that when creating a Custom SQL Alert it locks in the initial SELECT statement and I'm having trouble incorporating that into the your query that I edited a bit. Select Nodes.Caption…

What was the canned alert name?