dpatzold1979

So i went through my 32 devices that were reporting false positives and disabled Hardware Health Sensors. But they are still triggering alerts and showing up in the summary view. Anyone know why alerts would trigger for Hardware Health Sensors if the resource is unchecked/disabled for that device?

I upgraded to 10.7 and i have the same/similar problem. Cisco shop with 4500 6500 etc... they do not show power supplies any more. or other hardware health.. i still use my custom poller and it works for reporting issues though.

I need custom views as well in ipam. Column order as well as which columns are showing by default.

i have a similar issue with nexus and tftp where it copies up to 30 or 40 MB and then disconnects. also using scp it copys 50 mb but then slows down to a crawl of 75K a sec though scp did complete after 20 or 30 mins for 160MB file

So what i have done is used the custom html resource to insert an animated gif. all you need to do is find the one you want from your local news or any website that has the weather loop you want. I decided to not overlay the weather with our network map as it gets a little two "Busy" but you can do that by inserting it as…

Do you have a screen shot you can upload? what model switch is it?

Would love that

Reqeusted as a feature. The main purpose of an ip address managment system would be to keep static ips static. the free ip address management tools have this option. "currently there is no straightforward way how to keep IPs as reserved on subnets where the poling is turned on and subnet is not managed by DHCP server. What…

I have been working IPAM migration from eng toolset and this post made me laugh. i needed a good laugh because IPAM should get you away from using excel spreadsheets right? well not if your static reserved ips all of a suddent get wiped out of the system if they dont ping for 2 days due to a short transient period. Back to…

We use BIGIP F5 LTM and have used a few custom pollers to monitor cpu memory and vs/pool status. We would like this built in as well.

WE NEED THIS FEATURE PLEASE?. http://thwack.solarwinds.com/message/138108#138108

any answer to this as i would love to remove links from the email as well as the pdf file itself not having links embedded

I aggree. an option to mark a specific trap as event would be nice We use a good combination of Polling the specific SNMP OID for an issue and we also email alert our NOC when specific traps come in. Though they have to respond to the trap there is no ack for them to document they are working on it. One thing i saw though…

Yes we need a way to enforce or setup an initial view for all users at least. Which columns, column ordering. etc.

Guys i added this to the feature request section. Please go "Like it" to increase traction on this request. http://thwack.solarwinds.com/thread/48577

So i trained my users as i caught this after the upgrade. and it already hit me 2 times. It increases elemenets/load on the poller. It adds Vlan interfaces or loopbacks that we just dont need to monitor.

I have the same problem. i have over 500 subnets that i need to organize and it doesnt seem to be very easy to group. I imported from the eng toolset and i have a lot of cleanup to do. I also wish i can search or filter for a subnet and not just IP address as we reserve ip's a lot and need a fast way of getting to the…

I need this as well. Like in sharepoint where you can edit a list in datasheet view. This will help a lot.

I have same problem with NPM 12 but mine seems to be with the collector service.

I am in the same boat. did you find any answers to moving data from one interface to another or from one node to another as we replace our internet routers we dont want to lose over all data.

I believe i have the same problem with snmpv3 on a device. any resolution?

We are having the same problem copying via SCP. Crashes the service. the switch was SSH 1.99. changing to 2 did not resolve copying via SCP to Cisco 9300 switches. TFTP worked fine.

http://thwack.solarwinds.com/thread/48694 i just deleted several interfaces and didnt realize i had the node selected and bam its all gone. really need a way to restore since the item doesnt get deleted untill maintenace. at least a way without restoring via sql

The ability to undelete nodes or interfaces so you dont lose stats. it is very easy to delete a node or many nodes and poof there goes a lot of good information. without restoring a database that is.

I upgraded from IPAM v2 to v3 and i am running Orion Core 2011.2.2, IPAM 3.0, NPM 10.2.2 I would recommned a backup and a scheduled down time as i had to reboot. So far so good on IPAM v3

This worked for me

Ok so one portion solved. I created two custom sql reports in report writer to list nodes that are unmanaged. I used the posted sql query and also created one for interfaces with the same settings. http://thwack.solarwinds.com/docs/DOC-65948 I then just created a new view on the website to list the custom report.

I have the same problem. did you get this fixed? can you share?