dclick · Senior Network Engineer · ✭✭✭✭✭

Its possible, but not out of the box. You will need to create a custom property, and assign it to each interface, then you can run your reports/view based on this properly. I tend to do this to flag the Telco on my T1's.

I hate to resurrect old topics, but I am haivng some issues with downloading configs from our nexus units. Did you find a Nexus device template? I seem to have trouble locating one.

I dont know if you have made any progress with this, but there are a couple of UDP pollers in the Content Exchange that will allow you to, at the least, graph the number of current (Active) sessions of your vpn sessions - I have ours set to so WebVPN, AnyConnect, IPSec and IPSec L2L. Here are the OID's I am using on a…

I havent tested this - its always been an addon to NPM for us, but it looks like it is now a standalone product. Network Traffic Analyzer – Bandwidth Monitor | SolarWinds.

As-is no. You can use the Network Atlas tool with the Discovery to "link" nodes, but you have to put the nodes on a map and then use the "connect now" feature. it would be AWSOME if that functionality was there - feature request?

Has there been any progress on this? I dont see much in progress.

within the application itself, its one map based on what you scan. If you scan 1 subnet, or if you scan 20 subnets - its one map. if you export to Visio, you can do whatever you wish.

i know this is a VERY old post, but did you ever get an answer? I came across this myself today w/NCM 7.0.2

What do you mean when you say "6500 Sup720 - does not work"? I have 7 6500 chassis, (6 6509's and 1 6513). I use a Sup720-3b, and UDT has no problems with them. It detected my CMM modules, Wireless Controllers, and the 3 different 10/100/1000 blades, as well as all my 10g ports. Do you have "nodes" directly connected to…

did you ever get this resolved? We recently upgraded to Unity Connection 8.6, and I was about to start adding it to our APM. 

I have it running, and love it. So easy to do.. I think I ended up upgrading my packages - and make sure is "-S" (case is very important.) cant remember doing anything else,.

Yes, I am running as root. I am attempting to simplify our configurations - one syslog entry, one netflow entry. replicating the data from there makes life much easier, for us.

I just want to change those nasty browns..

is it possible to also give us an option to just "unmanage" the device/group, without being requried to give it a date/time range?

Im assuming since noboy has remarked, commented or anything else on this thread, NOBODY is having the issue, or pushing it as far as I did yet. so far, neither Cisco or Solarwinds has been able to help "fix" the problem, so I have had to make some changes to how I import/monitor ports on the nodes, and hope for the best.…

You probably need to open a ticket so Support can assist - if you haven't already.

AFAIK - you cant. there is no option to disable that menu. Curious why - its just a filter for searching. Maybe if they renamed it to "Search Options"... .

Has anyone ran into an issue that the 10.1.1 msi installer is being denied access to launch because of a "software restriction policy"?? I get errors in our event log that show that the install only allows the installation of unrestricted items. Ive not seen this before with ANY solarwinds products, so I dont know if this…

First off - check your Options - Setup (Ctrl+S) - MISC - do you have something defined for SSH? (I use Putty - so, for me, its just c:\putty.exe, which works quite well.) Secondly - A) For each device that you have moved to ssh - are you able to connect to them normally - via putty/securecrt/etc? B) Are you using radius or…

I was told there is no support for the Engineers toolset and 64 bit versions of an os. I tried with Vista, but never got past the install screens. Good luck.

You may have an answer already, but Ill share what we have done. We found that Digi makes a serial port redirector that is networked based. Esentially, I installed software that redirects all calls to COM1: to an IP address of this digi box (which has a modem serially attached). so far, its been working quite well. I have…

Can we get 3DES encryption for SNMP v3 added? Many of my devices (cisco ASA firewalls) support this encryption. Thanks.

quick question that I hope one of you can quickly answer - we dont have that many ap's yet - but, I have noticed that SSID's are missing from the list - is that because we have them set to NOT broadcast, or is there something I just missed somewhere?

The Autodiscovery option of Visio has been removed with Visio 2003 professional, HOWEVER, it *IS* availible in the Resource tools for Visio 2003.

I was looking for one based on the Switch Port Mapper, but tech support tells me its not possible. Disappointing

Issue resolved - changed the way I was logging into the remote device - enabled the "Initial Login requires username/password" field and it magically works...doh..

Motorola Cliq T and Ipad 3G - No autodetection. I am going to open a case - I need the autodetection to work, so Ill post back if I get something.

Thanks guys. This helped!

This would be a good report.

Found it.. (My Dashboard -> Configure -> select the external link you can change it to open in a new window.