bkyle · Professional Servi ces Engineer

If you right-click on a node and select Node Properties, you will get a pop up window that has a VLAN Data tab. This will provide the VLAN ID aolng with all ports in that VLAN.

Gabriel , Are you able to relay mail through either of these SMTP servers from a command line on the ipMonitor system?

Which username ans passwords are you wanting to change? SSH, AAA, etc.

Thanks for the testing. I believe that we have a feature request to get Windows 10 support added.

What errors do you see when using the Device.Backup.Running Config activity?

Please get a screenshot showing the registry key that you created, and the key name. Please add that to your response.

You will want to look for the name that is showing up for the device(the incorrect name). We pull the device via, SNMP, CDP, or LLDP.

Stefan How big are the files in the mailqueue folder?

Kindra, Please see my previous post: Adding devices to the Kiwi Syslog free version

I would check your settings (File\Setup), and make sure there is not more that one Log to Kiwi Syslog Web Access rule. If so delete all but one. This can happen if you ever have to reinstall Kiwi Syslog server.

Try running the Syslogd_Manager as an administrator. Please see this screenshot:

Spider, There is a Hotfix 2 for 9.5.0: SolarWinds Kiwi Syslog Server version 9.5 Hotfix 2 This HotFix addresses the following issues: - Memory leak issue in Kiwi Syslog Server. - Kiwi Syslog Server is crashing randomly on some systems while parsing the received message "Type Mismatch error". Notes: - This Hotfix requires…

Please upload a screenshot of what you are seeing.

Ray, Please run this tool: http://solarwinds.s3.amazonaws.com/solarwinds/Release/LicenseManager/LicenseManager.zip Let me know if you get any errors when running this tool.

I would not run 200 devices in one activity. I would split the devices up into about 4 activities of 50 each, and schedule them to run about 15 minutes apart.

You can increase the number of hosts included in the statistics report. Please see this link: Kiwi Syslog Server

Have you tried using "show running-config" in the Show Running Config box on the Additional Commands tab in Variations for that device?

I would recommend reinstalling as a service. This way it will run even when the manager is closed. You will be able to see the messages in the display when you relaunch the syslogd manager.

What do you have checked under Discovered Nodes?

Abdun, Please seee this link: https://technet.microsoft.com/en-us/library/ff710475%28v=ws.10%29.aspx I have been able to import a certificate into Kiwi Syslog this way, and be able to bind to port 6514.

The default path on a 64 bit system is C:\Program Files (x86)\SolarWinds\Kiwi Syslog Web Access\html\App_Data. Please note that to change the path, you will want to uninstall the Kiwi Syslog Web Access, move this folder to a similar path on another drive, and then install to that path. You can run just the web installer…

Do you have any trunks/port channels setup?

The Report.ARP table activity airsun mentioned may help. When trying this activity what do you get back?

Were you able to get the newer TLS supported files?

Sorry for the delay. If you do a netstat -ao which application is listening on ports 161 and 162?

You will need Log Forwarder on each system, as it sends to the syslog server once they are received in the Windows event log.

I would try selecting Cisco.SmallBusiness device. If you get the same error , please use Variations, and go to the Additional Commands tab, check the Exit Enable Mode box and delete the contents. Next click Save, the OK and try the activity. See this screenshot:

Thanks for the update. This could have been due to an issue resolved by on of the Hot fixes.

Jack, Please add a log to display action to the Send To Gina rule, and set it to Display07. Next go to that display, and see if there are any syslogs showing up.

That is how I recommend excluding (discarding) traffic. Try it and see if that works for you.