aliendan

Is there any other way to trigger the schedules, maybe externally?

Looks like all the data that was added before the update never left. We purged all data older than 4 days and are sitting good.

We don’t currently own APM but it is slated for next year. Could you go into a little detail on how this can be done with APM. Or direct me to the proper doc’s?

I need a little more explanation. Is there a space requirement? How much load will this share create? Since I don’t want it to affect any of my other shares I have currently. I want to make share on each of my Celerras for this purpose. Do you have any examples how other customers set this up?

Fixed.

I think the issue is with our filter. You need three condition groups. The top one is will contain the two other conditions and needs to be set to All. The condition group with your Custome Props needs any and the Device type needs to be an all condition. OR like this

This would be very helpfull. I have to push this to over 500 server and really do not want to to a manual install on every one.

Service pack 1 is available. It is not available as an independent Download but if you download and unzip Orion 9.0 there is an update.exe that is SP1, or at least what support told me.

Is it safe to assume since I have had no replies to this post that there is no support for the log forwarder?

If you add "/console" after the host name in RDP you can get one more login to the server with out running TS. This will give you 3 logins. Don't know how many logins you need concurrently. IE Hostname /console 

Has there been any improvements for environment with large amounts of nodes. One issue that I have run into is that netperfmon.exe does not stop or start as fast as the config wizard would like and they throws errors or fails do to reaching the time limits.

By broken what do you mean?

Currently monitoring 2750 Interfaces. Mostly MPLS and lightly used Gig links. Keep uncompressed data for 4 hoursKeep compressed data for 14 days. Currently NetFlow is 80 GB of out total 101 DB. Average CPU on 2.93 X4 box 50 to 70 %. Daily DB growth about 2 GB.

What is the message that will post to the event log? I have been unable to find this message. My install has been up for about 7 days. I do have about 3000 APS though.

So you are saying with a script i could run a command and send the ourput as a syslog message to a destination of my choice ?

8.5.1 Current with patches.

Is your condition group set to all or any? if you are set to any only one of your three conditions need to be meet for the alert to trigger.

Looks like all three are on the same subnet. I have found some very helpful information in the manual. With these changes I was able to get the server running and not use the buffer. Enable File write caching Section: HKEY_LOCAL_MACHINE\SOFTWARE\Kiwi Enterprises\Syslogd\Properties Value (STRING): FileWriteCacheEnabled Min…

Yes, these are currently all the nodes in our production environment. They are spread across 4 pollers. Our production Data Base is on the company SQL servers and SVC. Both of which go down from time to time for maintenance and issues. The goal is to have a solution that would continue to monitor be it only up / down while…

We would only be doing ICMP. No Stats or Interfaces. Is there a way other than entering the nodes as ICMP only to turn off all SNMP?

We have all of our alerts set to every one minute. The problem is the I think we may be maxing our the system. What would be the best practice for this setting?

I have verified I did select overwrite. The problem is I want to run the report every 15 minutes so the dashboard has more current performance charts.

I need to put 9 charts on one page. Every chart needs to be a different interface from a different node. Most items have a Filter Nodes option but not the charts that I have found. I am making a dashboard of out core Switch Network and their ports.

Can you double check this. This does not work. I have tryed removing the Home link and when the user logs in they are still sent to the page called home, even though they do not have it on there menu bar.

Any idea when this next version will be hitting shelf’s? This would help plan the next 6 months.

You would recommend only having one server have the alert service running? Could having more than one run be creating DB locks?

The stopping and starting of Orion should be the easy part. We will use a simple batch script. I think I will only need to copy the nodes table (but that is what I am looking into). In our BD this is only about 6.8 MB. That copy should be quick. About the polling cycles. The mirror system is only going to ping the nodes.…

CurrentCorrection Wireless is Current Orion Is 8.5.1 with out SP2

I am think it is DB to DB. "The Orion Poller Migration Utility helps you migrate an Orion Poller to a full-fledged Orion NPM installation. This utility copies your poller data to a new database, allowing you to substitute a licensed Orion NPM deployment in place of the poller."

Here is the CPU for all of the Vm's and the Total CPU. The total CPU looks way to low.